CVE Feed

In the Linux kernel, the following vulnerability has been resolved: xfrm: policy: preallocate inexact bins before xfrm_hash_rebuild reinsert xfrm_hash_rebuild()'s first loop preallocates the bins/chains the reinsert loop needs, so the reinsert (after hlist_del_rcu()) cannot allocate or fail. But its guard is inverted: it skips policies with prefixlen < threshold and preallocates for the rest. prefixlen < threshold is exactly when policy_hash_bysel() returns NULL and the reinsert takes the allocating xfrm_policy_inexact_insert() path. So the loop preallocates for the exact policies (which never allocate) and skips the inexact ones, whose bin/node is then allocated GFP_ATOMIC during reinsert. On failure the error path only WARN_ONCE()s and continues, leaving a poisoned bydst node; the next rebuild's hlist_del_rcu() dereferences LIST_POISON2 and takes a GPF. Reachable under memory pressure, deterministic via failslab. Invert the guard so preallocation covers exactly the reinserted policies; the reinsert then allocates nothing and cannot fail. Crash: Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0xdead...] ... Workqueue: events xfrm_hash_rebuild RIP: 0010:xfrm_hash_rebuild+0x5b3/0x1190 RAX: dead000000000122 (LIST_POISON2 + offset) ... Call Trace: hlist_del_rcu (include/linux/rculist.h:599) xfrm_hash_rebuild (net/xfrm/xfrm_policy.c:1365) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... Kernel panic - not syncing: Fatal exception in interrupt

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate compound request size before reading StructureSize2 When ksmbd validates a compound (chained) SMB2 request, ksmbd_smb2_check_message() reads pdu->StructureSize2 without first checking that the compound element is large enough to contain it. StructureSize2 is a 2-byte field at offset 64 (__SMB2_HEADER_STRUCTURE_SIZE) from the start of each element. The compound-walking logic only guarantees that a full 64-byte SMB2 header is present for the trailing element: when NextCommand is 0, len is reduced to the number of bytes remaining after next_smb2_rcv_hdr_off. A remote client can craft a compound request whose last element has exactly 64 bytes, so the 2-byte StructureSize2 read at offset 64 extends one byte past the receive buffer, producing a slab-out-of-bounds read. BUG: KASAN: slab-out-of-bounds in ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402) Read of size 2 at addr ffff888012ae31ac by task kworker/0:1/14 The buggy address is located 172 bytes inside of allocated 173-byte region Workqueue: ksmbd-io handle_ksmbd_work Call Trace: ... kasan_report (mm/kasan/report.c:595) ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402) handle_ksmbd_work (fs/smb/server/server.c:119) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Reject any compound element that is too small to hold StructureSize2 before dereferencing it.

In the Linux kernel, the following vulnerability has been resolved: gtp: check skb_pull_data() return in gtp1u_send_echo_resp() gtp1u_send_echo_resp() ignores skb_pull_data()'s return value. Its caller gtp1u_udp_encap_recv() only guarantees 16 bytes (udphdr + gtp1_header), but the pull requests 20 (gtp1_header_long + udphdr). For a 16-19 byte echo request the pull fails and returns NULL without advancing skb->data; execution continues, and the following skb_push() plus the IP header pushed by iptunnel_xmit() move skb->data below skb->head, tripping skb_under_panic(). Fix it by dropping the packet when skb_pull_data() fails. skbuff: skb_under_panic: ... kernel BUG at net/core/skbuff.c:214! Call Trace: skb_push (net/core/skbuff.c:2648) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:82) gtp_encap_recv (drivers/net/gtp.c:701 drivers/net/gtp.c:808 drivers/net/gtp.c:920) udp_queue_rcv_one_skb (net/ipv4/udp.c:2388) ... Kernel panic - not syncing: Fatal exception in interrupt

In the Linux kernel, the following vulnerability has been resolved: nexthop: initialize extack in nh_res_bucket_migrate() nh_res_bucket_migrate() passes an uninitialized netlink_ext_ack to call_nexthop_res_bucket_notifiers(). When nh_notifier_res_bucket_info_init() fails (e.g. the kzalloc returns -ENOMEM), the error is propagated back before any notifier sets extack._msg, and the error path formats the stale pointer with pr_err_ratelimited("%s\n", extack._msg). With CONFIG_INIT_STACK_NONE this dereferences uninitialized stack memory: Oops: general protection fault, probably for non-canonical address ... KASAN: maybe wild-memory-access in range [...] RIP: 0010:string (lib/vsprintf.c:730) vsnprintf (lib/vsprintf.c:2945) _printk (kernel/printk/printk.c:2504) nh_res_bucket_migrate (net/ipv4/nexthop.c:1816) nh_res_table_upkeep (net/ipv4/nexthop.c:1866) rtm_new_nexthop (net/ipv4/nexthop.c:3323) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) netlink_sendmsg (net/netlink/af_netlink.c:1900) Kernel panic - not syncing: Fatal exception Zero-initialize extack so _msg is NULL on error paths that never set it.

In the Linux kernel, the following vulnerability has been resolved: bpf: tcp: fix double sock release on batch realloc bpf_iter_tcp_batch() releases the current batch via bpf_iter_tcp_put_batch(), which drops the socket refs and rewrites each slot with the socket cookie, then grows the batch. cur_sk/end_sk are kept for bpf_iter_tcp_resume(), but on realloc failure the function returns ERR_PTR() before resume runs, leaving cur_sk < end_sk over slots that now hold cookies rather than sock pointers. bpf_iter_tcp_seq_stop() then calls bpf_iter_tcp_put_batch() again and dereferences a cookie as a struct sock. Empty the batch on the failure path so stop() does not release it again. The sockets were already freed by the first bpf_iter_tcp_put_batch(), so nothing leaks, and a later read() rescans the bucket from the start instead of skipping it. The sibling GFP_NOWAIT failure path still holds real socket references and is left for stop() to release. BUG: KASAN: null-ptr-deref in __sock_gen_cookie Read of size 8 at addr 0000000000000059 by task exploit ... __sock_gen_cookie (net/core/sock_diag.c:28) bpf_iter_tcp_put_batch (net/ipv4/tcp_ipv4.c:2918) bpf_iter_tcp_seq_stop (net/ipv4/tcp_ipv4.c:3270) bpf_seq_read (kernel/bpf/bpf_iter.c:205) vfs_read (fs/read_write.c:572) ksys_read (fs/read_write.c:716) do_syscall_64 entry_SYSCALL_64_after_hwframe Kernel panic - not syncing: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: tear down new links on vif update error path When ieee80211_vif_update_links() adds new links it allocates a link container for each and calls ieee80211_link_init() (which registers the per-link debugfs files with file->private_data pointing into the container) and ieee80211_link_setup(). If the subsequent drv_change_vif_links() fails, the error path restores the old pointers and jumps to 'free', which frees the new containers but never removes their debugfs entries or stops the links. The debugfs files survive with file->private_data dangling at the freed container, so a later open()+read() (e.g. link-1/txpower) dereferences freed memory in ieee80211_if_read_link(), a use-after-free. The removal path already dismantles links correctly via ieee80211_tear_down_links(), which removes each link's keys and debugfs entries and calls ieee80211_link_stop(); the add path on the error branch does not. Commit be1ba9ed221f ("wifi: mac80211: avoid weird state in error path") hardened this same error path for the link-removal case (new_links == 0) but left the newly-added links' teardown unaddressed. drv_change_vif_links() can fail at runtime on MLO drivers (internal allocation / queue / firmware command failures). Remove the new links' debugfs entries and stop them before freeing. BUG: KASAN: slab-use-after-free in ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127) Read of size 8 at addr ffff888011290000 by task exploit/145 Call Trace: ... ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127) short_proxy_read (fs/debugfs/file.c:373) vfs_read (fs/read_write.c:572) ksys_read (fs/read_write.c:716) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) ... Oops: general protection fault, probably for non-canonical address 0xdffffc000000000a RIP: 0010:ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127) Kernel panic - not syncing: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix NVM tag length underflow in TLV parser In the TLV_TYPE_NVM branch of qca_tlv_check_data() the tag loop bound is "while (idx < length - sizeof(struct tlv_type_nvm))". "length" is a signed int from the firmware TLV header and sizeof(struct tlv_type_nvm) is a size_t (12), so "length" is converted to size_t and any firmware-supplied "length" < 12 makes the subtraction wrap to a huge value. The loop body then reads a 12-byte struct tlv_type_nvm past the end of the short vmalloc'd firmware buffer (and the EDL_TAG_ID_* handlers can write past it). Rewrite the bound as "idx + sizeof(struct tlv_type_nvm) <= length"; both operands are non-negative, so it no longer underflows and a "length" too small for one record correctly skips the loop. BUG: KASAN: vmalloc-out-of-bounds in qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421) Read of size 2 at addr ffffc900000e5004 by task kworker/u9:0/52 Workqueue: hci0 hci_power_on Call Trace: ... kasan_report (mm/kasan/report.c:595) qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421 drivers/bluetooth/btqca.c:617) qca_uart_setup (drivers/bluetooth/btqca.c:948) qca_setup (drivers/bluetooth/hci_qca.c:2029) hci_uart_setup (drivers/bluetooth/hci_ldisc.c:438) hci_dev_open_sync (net/bluetooth/hci_sync.c:5227) hci_power_on (net/bluetooth/hci_core.c:920) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245)

In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: free fib_alias with kfree_rcu() on insert error path fib_table_insert() publishes new_fa into the leaf's fa_list with fib_insert_alias() before calling the fib entry notifiers. When a notifier fails, the error path removes new_fa with fib_remove_alias() (hlist_del_rcu) and frees it right away with kmem_cache_free(). fib_table_lookup() walks that list under rcu_read_lock() only, so a concurrent lookup that already reached new_fa keeps reading it after the free: BUG: KASAN: slab-use-after-free in fib_table_lookup (net/ipv4/fib_trie.c:1601) Read of size 1 at addr ffff88810676d4eb by task exploit/297 Call Trace: fib_table_lookup (net/ipv4/fib_trie.c:1601) ip_route_output_key_hash_rcu (net/ipv4/route.c:2814) ip_route_output_key_hash (net/ipv4/route.c:2705) __ip4_datagram_connect (net/ipv4/datagram.c:49) udp_connect (net/ipv4/udp.c:2144) __sys_connect (net/socket.c:2167) __x64_sys_connect (net/socket.c:2173) do_syscall_64 entry_SYSCALL_64_after_hwframe which belongs to the cache ip_fib_alias of size 56 Triggering the error path needs CAP_NET_ADMIN and a registered fib notifier that can reject a route; a netdevsim device whose IPv4 FIB resource is exhausted is enough. Free new_fa with alias_free_mem_rcu(), as fib_table_delete() already does for a fib_alias removed from the trie.

In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate RX frame length in p54_rx_eeprom_readback() p54_rx_eeprom_readback() copies the requested EEPROM slice out of a device-supplied readback frame without checking that the skb actually holds that many bytes. Commit da1b9a55ff11 ("wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback()") closed the destination overflow by copying a fixed priv->eeprom_slice_size (and rejecting a mismatched advertised len), but the source side is still unbounded: nothing verifies the frame is long enough to supply that many bytes. A malicious USB device can send a short frame whose advertised len matches priv->eeprom_slice_size while the payload is truncated. The equality check passes and memcpy() reads past the end of the skb, leaking adjacent heap: BUG: KASAN: slab-out-of-bounds in p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) Read of size 1016 at addr ffff88800f077114 by task swapper/0/0 Call Trace: <IRQ> ... __asan_memcpy (mm/kasan/shadow.c:105) p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) p54u_rx_cb (drivers/net/wireless/intersil/p54/p54usb.c:163) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:2005) ... </IRQ> The buggy address belongs to the object at ffff88800f0770c0 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 84 bytes inside of allocated 704-byte region [ffff88800f0770c0, ffff88800f077380) Check that the slice fits in the skb before copying.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix fils_discovery double free on alloc failure ieee80211_set_fils_discovery() calls kfree_rcu() on the old template before allocating the replacement. If the kzalloc() then fails, it returns -ENOMEM while link->u.ap.fils_discovery still points at the object already queued for freeing. A later update or AP teardown (ieee80211_stop_ap()) re-queues that same rcu_head; the second free is caught by KASAN when the RCU sheaf is processed in softirq: BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850) Free of addr ffff88800c065280 by task swapper/0/0 ... __rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940) rcu_free_sheaf (mm/slub.c:5850) rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) The buggy address belongs to the cache kmalloc-96 of size 96 Queue the old object for kfree_rcu() only after the new one is published, matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon().

In the Linux kernel, the following vulnerability has been resolved: mpls: fix NULL deref in mpls_valid_fib_dump_req() on CONFIG_INET=n On CONFIG_INET=n builds, mpls_valid_fib_dump_req() walks the parsed attribute table itself instead of calling ip_valid_fib_dump_req(). The RTA_OIF arm passes tb[RTA_OIF] to nla_get_u32() without checking it is present, so an RTM_GETROUTE dump for AF_MPLS with strict checking and no RTA_OIF hits a NULL dereference. RTM_GETROUTE is RTNL_KIND_GET, which rtnetlink_rcv_msg() permits without CAP_NET_ADMIN, so an unprivileged user can trigger it. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:mpls_valid_fib_dump_req (net/mpls/af_mpls.c:2189) Call Trace: mpls_dump_routes (net/mpls/af_mpls.c:2236) netlink_dump (net/netlink/af_netlink.c:2331) __netlink_dump_start (net/netlink/af_netlink.c:2446) rtnetlink_rcv_msg (net/core/rtnetlink.c:7033) netlink_rcv_skb (net/netlink/af_netlink.c:2556) netlink_unicast (net/netlink/af_netlink.c:1345) netlink_sendmsg (net/netlink/af_netlink.c:1900) __sock_sendmsg (net/socket.c:790) ____sys_sendmsg (net/socket.c:2684) ___sys_sendmsg (net/socket.c:2738) __sys_sendmsg (net/socket.c:2770) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Skip unset attributes, as ip_valid_fib_dump_req() does.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix unsol_bcast_probe_resp double free on alloc failure ieee80211_set_unsol_bcast_probe_resp() calls kfree_rcu() on the old template before allocating the replacement. If the kzalloc() then fails, it returns -ENOMEM while link->u.ap.unsol_bcast_probe_resp still points at the object already queued for freeing. A later update or AP teardown re-queues that same rcu_head; the second free is caught by KASAN when the RCU sheaf is processed in softirq: BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850) Free of addr ffff88800d06f300 by task exploit/145 ... __rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940) rcu_free_sheaf (mm/slub.c:5850) rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) The buggy address belongs to the cache kmalloc-128 of size 128 Queue the old object for kfree_rcu() only after the new one is published, matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon().

In the Linux kernel, the following vulnerability has been resolved: btrfs: reject free space cache with more entries than pages When loading a v1 free space cache, __load_free_space_cache() takes num_entries and num_bitmaps straight from the on-disk btrfs_free_space_header. That header is stored in the tree_root under a key with type 0, which the tree-checker has no case for, so neither count is validated before the load trusts it. The load loops num_entries times and maps the next page whenever the current one runs out, going through io_ctl_check_crc() -> io_ctl_map_page(), which does io_ctl->pages[io_ctl->index++]. But pages[] is allocated in io_ctl_init() from the cache inode's i_size, not from num_entries: num_pages = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE); io_ctl->pages = kcalloc(num_pages, sizeof(struct page *), GFP_NOFS); So if num_entries claims more records than the pages can hold, io_ctl->index runs off the end of pages[]. The write side never hits this because io_ctl_add_entry() and io_ctl_add_bitmap() both stop once io_ctl->index >= io_ctl->num_pages; the read side just never had the same check. To trigger it, take a clean cache (num_entries = <N> here), set num_entries in the header to 0x10000, and fix up the leaf checksum so it still passes the tree-checker. The cache inode has i_size = 65536, so num_pages is 16 and pages[] is a 16-pointer (kmalloc-128) array. The load now tries to read 65536 entries, io_ctl->index walks up to 16, and pages[16] is read past the array: BUG: KASAN: slab-out-of-bounds in io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565) Read of size 8 at addr ffff88800c833a80 by task kworker/u8:3/58 io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565) __load_free_space_cache (fs/btrfs/free-space-cache.c:655 fs/btrfs/free-space-cache.c:820) load_free_space_cache (fs/btrfs/free-space-cache.c:1017) caching_thread (fs/btrfs/block-group.c:880) btrfs_work_helper (fs/btrfs/async-thread.c:312) process_one_work worker_thread kthread ret_from_fork free-space-cache.c:420 is io_ctl_map_page(), inlined into io_ctl_check_crc() at line 565, which is why that is the frame KASAN names. The out-of-bounds slot is then treated as a struct page and handed to crc32c(), so the bad read turns into a GP fault. Add the missing check to io_ctl_check_crc(), which is where both the entry loop and the bitmap loop end up. When num_entries is too large the load now fails like any corrupt cache: __load_free_space_cache() drops it and rebuilds the free space from the extent tree, so a valid cache is never rejected.

In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: propagate SKBFL_SHARED_FRAG in iptfs_skb_add_frags() When iptfs_skb_add_frags() copies frag references from the source frag walk into a new SKB, it increments the page reference count via __skb_frag_ref() but does not propagate SKBFL_SHARED_FRAG to the destination SKB's skb_shinfo->flags. If the source SKB carries shared frags (e.g. from a page-pool backed receive path), the new inner SKB will appear to ESP as having privately owned frags. A subsequent esp_input() call for a nested transport-mode SA then takes the no-COW fast path and decrypts in place, writing over pages that are still referenced by the outer IPTFS SKB. This causes kernel-visible memory corruption and can trigger a panic. All other frag-transfer helpers in the kernel (skb_try_coalesce, skb_gro_receive, __pskb_copy_fclone, skb_shift, skb_segment) correctly propagate SKBFL_SHARED_FRAG; align iptfs_skb_add_frags() with this convention by setting the flag inside the loop immediately after __skb_frag_ref() and nr_frags++, so every exit path that attaches a frag unconditionally propagates SKBFL_SHARED_FRAG.

** UNSUPPORTED WHEN ASSIGNED ** Stack-based Buffer Overflow vulnerability in Apache Lucy. This issue affects Apache Lucy: all versions. As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

** UNSUPPORTED WHEN ASSIGNED ** Memory Allocation with Excessive Size Value vulnerability in Apache Lucy. This issue affects Apache Lucy: all versions. As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

** UNSUPPORTED WHEN ASSIGNED ** Deserialization of Untrusted Data vulnerability in Apache Lucy. This issue affects Apache Lucy: all versions. As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

** UNSUPPORTED WHEN ASSIGNED ** Uncontrolled Recursion vulnerability in Apache Lucy. This issue affects Apache Lucy: all versions. As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

The Askeet plugin for WordPress is vulnerable to SQL Injection via the 'sql_query' parameter in multiple AJAX actions (askeet_execute_sql_query, askeet_export_all_results) in all versions up to, and including, 3.0. This is due to the askeet_is_safe_query() filter being bypassable using MySQL conditional comments (e.g., /*!UNION*/). The filter strips regular block comments before checking for forbidden SQL keywords, but MySQL interprets conditional comments as executable code. This makes it possible for authenticated attackers, with Administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

The Multi Uploader for Gravity Forms plugin for WordPress is vulnerable to unauthorized arbitrary media deletion in all versions up to, and including, 1.1.8. This is due to missing capability checks in the `plupload_ajax_delete_file()` function, which is registered via `wp_ajax_nopriv_gfmu_delete_file`. The nonce intended for CSRF protection is exposed on any public-facing page containing a multi-uploader form field via the `GFMU_options` JavaScript object. This makes it possible for unauthenticated attackers to permanently delete any WordPress media attachment by supplying its attachment ID, potentially leading to complete media library destruction.

The Contact Form 7 – Dynamic Text Extension plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to, and including, 5.0.5. This is due to insufficient output escaping on form shortcode keys displayed in the admin "Scan Forms for Post Meta and User Data Keys" page. This makes it possible for authenticated attackers, with Editor-level access and above, to inject arbitrary web scripts that execute when an Administrator runs the scan feature.

The Super Progressive Web Apps plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the `superpwa_settings[offline_message_txt]` setting in all versions up to, and including, 2.2.43. This is due to insufficient input sanitization and output escaping. The offline message value is stored without sanitization, passed to the frontend via `wp_localize_script()` without escaping, and rendered using `innerHTML` in the JavaScript snackbar component. This makes it possible for authenticated attackers, with Administrator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user triggers the offline snackbar.

When API audit logging is enabled, the middleware reads the entire HTTP request body into memory without enforcing a size limit on login endpoints. Because the audit middleware is positioned earlier in the handler chain than Rancher's APIBodyLimitingHandler, the body-size cap (default 1 MiB) is bypassed for requests that pass through the audit copyReqBody path. An unauthenticated attacker can send arbitrarily large request bodies to the public login endpoints, causing the Rancher Manager server process to allocate memory proportional to the supplied body size. With just a few concurrent connections, this can exhaust available memory and terminate the Rancher Manager plane process, making the Rancher API and UI unavailable and interrupting management of all downstream clusters.

The endpoint /v3/import/{token}_{clusterId}.yaml retrieves the cluster object before validating the token. When a valid cluster ID references a cluster that has private registry secrets configured, a nil pointer dereference in pkg/systemtemplate/private_registry.go causes the request to return HTTP 502 Bad Gateway. For cluster IDs that do not exist, the endpoint returns HTTP 200. This observable difference in response codes constitutes a reliable enumeration oracle.

Rancher issues long-lived registration tokens to authenticate nodes and agents joining a downstream cluster. These tokens were stored and exposed in plaintext with no expiration, so a malicious user could obtain one either through the Rancher API, etcd, stored automation, or direct file access on a node, and could use it at any time to register a rogue node into the cluster.

A denial-of-service vulnerability was identified in multiple TLS listeners in Rancher. Both the cattle-cluster-agent component running in downstream clusters and the Rancher server itself use the dynamiclistener library to serve TLS traffic. Without an effective CN filter configured, dynamiclistener automatically appended to each serving certificate any hostname presented via Server Name Indication (SNI) in incoming TLS requests. An unauthenticated attacker with network access within the affected cluster could send a large number of TLS requests with distinct hostnames, causing the serving certificate to accumulate an unbounded number of Subject Alternative Names (SANs). Eventually, the certificate grows large enough that TLS handshakes fail with an excessive message size error, causing a denial of service on the affected listeners.

The pocketflow-coding-agent cookbook example in The-Pocket/PocketFlow implements a helper as a thin os.path.join(workdir, p) wrapper with no canonicalization or containment check, used unguarded by the ReadFile, ListFiles, PatchRead, and PatchApply file-access tools. Severity reflects that this affects an illustrative cookbook example rather than a core library API; applications that copy this pattern into production are affected.

Crater isolates data per company_id, and its Invoice/Estimate/Payment/Expense policies enforce both a Bouncer ability check and ->hasCompany(->company_id). CustomerPolicy's view/update/delete methods omit the company-ownership check entirely, checking only the blanket ability. Route-model-bound customer lookups and the bulk Customer::deleteCustomers method are similarly unscoped (self::find with no company filter).

Leantime through 3.6.2 exposes the JSON-RPC methods leantime.rpc.TwoFA.TwoFA.getSetupData, saveSecret, verifyAndEnable, and disable2FA, which act on a caller-supplied userId parameter with no ownership check, session pinning, or permission-attribute gate (unlike other RPC-exposed methods in the same dispatcher).

Pluck CMS through 4.7.21 restricts dangerous file uploads in its admin file-management feature using a fixed blacklist in data/inc/files.php ('.php','php3','php4','php5','php6','php7','phtml','.phtm','.pht','.ph3','.ph4','.ph5','.asp','.cgi','.phar'), checked against the last 4-5 characters of the filename.

The Easy Post Submission plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the `create_post()` function in all versions up to, and including, 2.3.0. This is due to the `rbsm_submit_post` AJAX action being registered for unauthenticated users via `wp_ajax_nopriv_rbsm_submit_post` without any authorization checks when a `postId` parameter is supplied. This makes it possible for unauthenticated attackers to modify the title, content, excerpt, categories, and tags of arbitrary posts, as well as change the post status to draft (effectively unpublishing them) via the 'postId' parameter.

The TableOn – WordPress Posts Table Filterable plugin for WordPress is vulnerable to blind SQL Injection via the `filter_data[comment_count]` parameter of the public `tableon_get_table_data` AJAX action in all versions up to, and including, 1.0.5.1. This is due to insufficient escaping on the user-supplied parameter and lack of sufficient preparation on the existing SQL query — the value is split on `:` and both halves are interpolated directly into a `posts_where` SQL clause without `intval()` casting or `$wpdb->prepare()`. This makes it possible for unauthenticated attackers to append additional SQL queries into the already-existing query that can be used to extract sensitive information from the database (researcher demonstrated extraction of database(), wp_users.user_login, and wp_users.user_pass).

The Seraphinite Accelerator plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'seraph_accel_prep' parameter in versions up to, and including, 2.29.15. This is due to the CacheExtractPreparePageParams() function using PHP's loose inequality operator (!=) to compare the expected HMAC string against the JSON-decoded 'nonce' value — supplying the JSON boolean true causes any non-empty HMAC string to compare as loosely equal, bypassing the signature check — combined with insufficient output escaping in the _CbContentFinishSkip() function, which concatenates the attacker-controlled 'selfTest' field directly into the HTML response body. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a specially crafted link.

The Translate Multilingual sites – TranslatePress plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 's' parameter in versions up to, and including, 3.2.5. This is due to the translate_page() function unconditionally replacing the plugin's internal #!trpst# and #!trpen# marker tokens with literal angle brackets across the entire HTML page output after WordPress has already sanitized and escaped user input — allowing the attacker to bypass WordPress's normal HTML escaping by using these tokens, which are not HTML special characters, in the search query. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a specially crafted link.

The User Access Manager plugin for WordPress is vulnerable to Second-Order SQL Injection via the 'id' parameter of the wp_ajax_save-attachment-compat AJAX action in versions up to, and including, 2.3.12. This is due to insufficient validation on the objectId value stored in the saveAjaxAttachmentData() function and subsequent unparameterized concatenation in the addQueryExcludedPostFilter() function — the stored value is later retrieved from the database and used as an array key, then directly imploded into a SQL NOT IN() clause without integer casting or prepared statements. This makes it possible for authenticated attackers, with subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

The Page and Post Restriction plugin for WordPress is vulnerable to Sensitive Information Exposure in versions up to and including 1.4.0 via the WordPress core REST endpoints /wp-json/wp/v2/pages, /wp-json/wp/v2/pages/<id>, /wp-json/wp/v2/posts, and /wp-json/wp/v2/posts/<id>. This is due to the plugin's REST guards — papr_restrict_page_post_rest_api() and the the_posts filter registered by papr_filter_posts() — sourcing their restricted-ID list exclusively from papr_get_restricted_posts_id(), which only reads the per-page metabox options papr_allowed_redirect_for_pages and papr_allowed_redirect_for_posts and never consults the two global toggles papr_access_for_only_loggedin and papr_access_for_only_loggedin_posts that the plugin's own UI describes as 'Make all Pages Private' / 'Make all Posts Private'. This makes it possible for unauthenticated attackers to read the full rendered content of every published page and post on sites configured with the documented global toggles, bypassing the security boundary enforced on the frontend by papr_restrict_logged_in_users().

The WP Post Author – Author Box, Multiple Authors, Guest Authors & Custom Avatars plugin for WordPress is vulnerable to generic SQL Injection via the 'wpma_metabox_authors_list' parameter in all versions up to, and including, 3.9.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with author-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. Exploitation is a two-step chain: an attacker first saves a crafted guest-author token via the wpma_metabox_authors_list parameter during post creation or editing, then triggers the injection when any admin user loads the post list screen at /wp-admin/edit.php, causing the injected SQL result to be rendered in the Authors column.

The WP TripAdvisor Review Slider plugin for WordPress is vulnerable to generic SQL Injection via 'curselrevs[]' Parameter in all versions up to, and including, 14.3 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

The JoomSport – for Sports: Team & League, Football, Hockey & more plugin for WordPress is vulnerable to time-based SQL Injection via the 'order' parameter in all versions up to, and including, 5.7.9 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The affected admin page lacks nonce or CSRF protection on the GET request, meaning an unauthenticated attacker could exploit this vulnerability by tricking an authenticated administrator into issuing a crafted request. Additionally, the vulnerability is only triggered when the 'orderby' parameter is also present and non-empty alongside the 'order' parameter.

The Groundhogg — CRM, Newsletters, and Marketing Automation plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 4.5.2 via the GET /wp-json/gh/v4/contacts/<id> REST endpoint. The endpoint's permission callback checks only the role-level view_contacts capability and read_single() returns the full contact record by sequential integer ID without the object-level view_contact ownership check applied elsewhere in the codebase. This makes it possible for authenticated attackers holding view_contacts but not view_others_contacts — notably Groundhogg's built-in Sales Rep role, designed to see only its own contacts — to read any contact record on the site, including PII, contact meta, owner IDs, the admin edit URL, and (for contacts linked to a WordPress user) that user's full capability set.