CVE Feed

The Dhara flash translation layer disk driver (drivers/disk/ftl_dhara.c) implemented the dhara_nand_ callbacks so that, on a flash error, the error code was written unconditionally through the caller-supplied dhara_error_t err pointer (e.g. *err = DHARA_E_ECC in dhara_nand_read, and similar in dhara_nand_erase/prog/copy). The upstream Dhara library calls these callbacks with err == NULL along its journal-resume binary search: find_last_checkblock() invokes find_checkblock(j, mid, &found, NULL), which forwards the NULL pointer into dhara_nand_read(). This path runs during disk_ftl_access_init() -> dhara_map_resume() whenever the FTL disk is mounted/initialised. If a flash read error (uncorrectable ECC, bad block, controller error) occurs on one of the probed checkpoint pages, the driver dereferences and writes to NULL, faulting the kernel (denial of service). The trigger is conditioned on the NAND medium content/health, which can be influenced by media wear, induced faults, or a corrupted/crafted on-flash image. The fix routes all error assignments through the library's NULL-safe dhara_set_error() helper. Affects Zephyr v4.4.0, where the driver was introduced.

Improper neutralization of special elements used in an LDAP query ('LDAP injection') vulnerability in HAVELSAN Inc. Liman MYS allows LDAP Injection. This issue affects Liman MYS: before release.Master.1107.

Improper verification of cryptographic signature vulnerability in HAVELSAN Inc. Liman MYS allows Fake the Source of Data. This issue affects Liman MYS: before release.Master.1107.

Module::Load versions before 0.22 for Perl allow arbitrary modules outside of @INC to be loaded. Module names starting with "::" could be passed to the load function to specify arbitrary module paths. Attackers able to influence module names passed to load could use that bug to execute arbitrary code.

Missing Authorization vulnerability in HAVELSAN Inc. Liman MYS allows Accessing Functionality Not Properly Constrained by ACLs. This issue affects Liman MYS: before release.Master.1107.

In Apache Airflow before 3.3.0, the REST API task-instance detail and list endpoints returned a deferred task's trigger kwargs without masking. When a deferred operator passed a secret (for example a provider API key) into its trigger, any authenticated user with DAG-scoped task-instance read access for that DAG could read that secret in clear text while the task was deferred. Users should upgrade to apache-airflow 3.3.0 or later, which masks sensitive values in trigger kwargs returned by the API.

Before apache-airflow 3.3.0, a user authorized to read one Dag could disclose the source of other Dags co-located in the same source file. `GET /api/v2/dagSources/{dag_id}` — and the equivalent Dag-source view in the UI — returned the entire source file without redacting Dags the caller was not authorized to read, bypassing per-DAG read authorization. Deployments that co-locate multiple Dags in a single file and rely on per-DAG access control to limit source visibility are affected; single-Dag-per-file deployments are not. Upgrade to apache-airflow 3.3.0 or later.

The Config API in Apache Airflow surfaced per-key secrets-backend overrides (environment variables like `AIRFLOW__SECRETS__BACKEND_KWARG__SECRET_ID` and `AIRFLOW__WORKERS__SECRETS_BACKEND_KWARG__SECRET_ID`) as synthetic config options whose option names were not in `sensitive_config_values`, so the masker did not redact them. An authenticated UI/API user with Config read permission could retrieve plaintext secrets-backend credentials (Vault `role_id` / `secret_id`, etc.) from the Config API output. Affects deployments that configure secrets backends via per-key environment overrides. Users are advised to upgrade to `apache-airflow` 3.3.0 or later.

A bug in Apache Airflow's `/ui/dependencies` scheduling graph endpoint applied the caller's readable-Dag filter to the top-level serialized Dag key but still emitted referenced Dag IDs through the `dep.source` and `dep.target` fields of trigger / sensor dependency entries. An authenticated UI user with read permission on some Dags could enumerate the identifiers of other Dags they were not authorized to read by inspecting the dependency graph for trigger / sensor references. Affects deployments that rely on per-Dag read scoping to keep Dag identifiers private across teams. This is a residual gap in the fix for CVE-2026-28563, which filtered the top-level Dag key but did not propagate the filter into the trigger / sensor dep-source / dep-target fields. Users who already upgraded for CVE-2026-28563 should additionally upgrade to `apache-airflow` 3.3.0 or later to cover the residual trigger / sensor dependency leak.

The Bulk Variables API in Apache Airflow called the redactor without passing the variable's key, so the key-based `should_hide_value_for_key` check (which triggers on secret-suffixed key names like `*_password` / `*_token` / `*_secret`) could not fire for JSON-decodable variable values. An authenticated UI/API user with bulk Variable read permission could retrieve plaintext values from JSON variables whose key would otherwise trigger redaction. Affects deployments that store sensitive values in JSON-typed Airflow Variables under secret-suffixed key names. Users are advised to upgrade to `apache-airflow` 3.3.0 or later (the fix landed on `main` after 3.2.2; no 3.2.x backport).

A bug in `BaseSerialization.deserialize()` allowed unrestricted `import_string()` of attacker-controlled class paths when the Scheduler / API Server loaded a serialized DAG: a DAG author could embed a malicious trigger into a DAG to gain remote code execution on the API Server / Scheduler process, crossing the Airflow security boundary that DAG-author code must never execute in those processes. Users are advised to upgrade to `apache-airflow` 3.3.0 or later. As a defense-in-depth mitigation, deployments where DAG-author trust is limited can restrict the `[core] allowed_deserialization_classes` config to a narrow allowlist.

The encryption algorithm used to protect the configuration of user accounts, stored in the built-in user directory of PcVue projects, all versions prior to 17.0.0, is not strong enough for the level of protection required. A local attacker could alter the existing configuration and ultimately gain privileged access to the PcVue application.

Credentials of built-in users are insecurely stored in the User directory of PcVue projects, all versions prior to 17.0.0. A local attacker could retrieve users’ credentials.  Active Directory accounts are not affected by this vulnerability.

A path traversal flaw was found in SSSD's AD GPO provider. The ad_gpo_extract_smb_components() function does not sanitize .. sequences in the gPCFileSysPath LDAP attribute, allowing an attacker with AD GPO management access to write files outside the GPO cache directory as root. On default RHEL configurations with SELinux enforcing, this can be used to inject Kerberos configuration leading to authentication bypass.

A flaw was found in SSSD's LDAP sudo provider. When the ldap_sudo_search_base option is not explicitly configured, SSSD searches the entire LDAP directory tree for sudoRole objects. An authenticated attacker with write access to any subtree can inject a sudoRole object granting root-level sudo privileges on all SSSD-enrolled hosts.

A heap buffer overflow flaw was found in the SASL I/O layer of 389 Directory Server (389-ds-base). After a successful SASL bind with integrity protection (SSF > 0), an authenticated attacker can send a specially crafted oversized LDAP UNBIND packet that is copied into a 512-byte heap receive buffer without a bounds check in sasl_io_recv() in sasl_io.c. This allows up to approximately 2 megabytes of attacker-controlled data to overflow the buffer, causing a denial of service (server crash). In FreeIPA and Red Hat Identity Management deployments, any domain user with a valid Kerberos ticket, any enrolled host, or any service account can trigger this vulnerability over the network after authenticating via GSSAPI. The vulnerable code path has existed since approximately 2013 (389-ds-base 1.3.2) and was not addressed by the CVE-2025-14905 fix, which patched a separate heap overflow in schema.c only.

A flaw was found in GIMP's PSD parser. An integer overflow in read_RLE_channel() can cause an undersized heap allocation for the RLE row-length table, after which subsequent per-row writes corrupt heap memory. This could lead to memory corruption, potentially resulting in denial of service or arbitrary code execution.

EEPROM firmware on Raspberry Pi 5 and Compute Module 5 devices produced non-random KASLR and RNG seed values. This resulted in consistent kernel addresses across boots and devices, potentially making it easier to exploit other vulnerabilities. Additionally, the low-quality RNG seed may affect the quality of random numbers or delay booting while sufficient entropy is accumulated from other sources.

Missing Authorization vulnerability in Armiya Information Technologies Ltd. Co. Access Control System (GKS) allows Collect Data from Common Resource Locations. This issue affects Access Control System (GKS): before Version 2.

Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Armiya Information Technologies Ltd. Co. Access Control System (GKS) allows Reflected XSS. This issue affects Access Control System (GKS): before Version 2.

Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Armiya Information Technologies Ltd. Co. Access Control System (GKS) allows Stored XSS. This issue affects Access Control System (GKS): before Version 2.

Improper neutralization of Script-Related HTML tags in a web page (basic XSS) vulnerability in Armiya Information Technologies Ltd. Co. Access Control System (GKS) allows XSS Targeting HTML Attributes. This issue affects Access Control System (GKS): before Version 2.

Authorization bypass through User-Controlled key vulnerability in Idvlabs Software and Consulting Services Inc. Ontime allows Exploitation of Trusted Identifiers. This issue affects Ontime: through 04052026.

Authorization bypass through User-Controlled key vulnerability in Idvlabs Software and Consulting Services Inc. Ontime allows Exploitation of Trusted Identifiers. This issue affects Ontime: through 04052026.

Cross-site request forgery vulnerability exists in SEIKO EPSON Web Config. If a user views a malicious page while logged into Web Config, unintended operations may be performed.

Relative path traversal vulnerability in MicroRealEstate file upload functionality allows attackers to potentially overwrite system files. This issue affects MicroRealEstate: through 1.0.0-alpha3.

Broken object-level access control on the Template API in MicroRealEstate allows attackers to retrieve document templates used by other organizations without authorization. This issue affects MicroRealEstate: through 1.0.0-alpha3.

Broken object-level access controls and the use of a deterministic pattern during random ID generation in MicroRealEstate allows attackers to access documents uploaded by landlords or tenants without authorization. This issue affects MicroRealEstate: through 1.0.0-alpha3.

MicroRealEstate is affected by broken object-level access controls in PDF generator functionality. This issue affects MicroRealEstate: through 1.0.0-alpha3.

MicroRealEstate allows adversaries to bypass authentication due to a lack of token state management. This would permit adversaries targeting MicroRealEstate deployments to brute-force One-Time Passwords (OTP) to log in as any user. This issue affects MicroRealEstate: through 1.0.0-alpha3.

The DoLeads Integrator WordPress plugin through 0.65, wp2epub WordPress plugin through 0.65 have been seen to be used to achieve RCE, once they are added adding to a blog, for example using a vulnerability where unclosed extensions from wordpress.org can be installed by unauthorized users.

The WPFunnels – Funnel Builder for WooCommerce with Checkout & One Click Upsell plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 3.12.7 via the 'postData' parameter parameter. This is due to unsanitized write of attacker-controlled postData values into a PHP-includeable .log file combined with the use of include_once to render that file in wpfnl_show_log. This makes it possible for unauthenticated attackers to execute code on the server. Exploitation requires that the Log Settings "Enable Logs" toggle is on and that an administrator subsequently opens the polluted log file via the plugin's Log Settings View UI; however, the nonce required to reach the optin endpoint is publicly emitted on every funnel step page, so the injection step itself is fully unauthenticated.

The uncanny-automator-pro WordPress plugin before 7.3.0.6 was distributed with malicious code after the vendor's uncanny-automator-pro WordPress plugin before 7.3.0.6 update/distribution infrastructure was compromised; the injected backdoor grants unauthenticated attackers an administrator session on affected sites and beacons the site's secret keys and administrator details to attacker-controlled servers.

The Frontend File Manager Plugin WordPress plugin through 23.6 does not validate a file path derived from user input before deleting the referenced file, allowing unauthenticated users to delete arbitrary files on the server (such as wp-config.php) when guest upload mode is enabled. Deleting wp-config.php forces the site into its setup routine, which can be leveraged toward a full site takeover.

The WP Travel Engine WordPress plugin before 6.8.1 does not properly validate the source of a user-supplied profile image path before moving the file, allowing authenticated users with subscriber-level access and above to relocate arbitrary files within the WordPress uploads directory into their own profile-image path. This removes the targeted media from its original location and can break content across the site.

Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to 4.0.0-beta.474, database credential fields (redis_password, keydb_password, dragonfly_password, clickhouse_admin_user, clickhouse_admin_password, postgres_user, mysql_user) are validated only as 'string' at the API layer, with zero shell-safety checks. These values are then interpolated directly into Docker Compose YAML command: strings without any escaping. This issue is fixed in version 4.0.0-beta.474.

Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to 4.0.0-beta.469, the executeInDocker() helper wraps user-controlled commands in single quotes without escaping embedded single quotes. Attackers who can edit application settings can inject a single quote into docker_compose_custom_build_command or docker_compose_custom_start_command to break out of the quoted context and execute arbitrary commands on the managed server host during deployments, escaping the intended Docker container confinement. This issue is fixed in version 4.0.0-beta.469.

Uncaught Exception (CWE-248) in the Controller 6000 and Controller 7000 diagnostic web interface allows an authenticated and authorized operator to trigger a Controller restart by sending specific requests, resulting in a temporary denial of service.  Version of Command Centre affected: * 9.50 prior to vCR9.50.260616a (distributed in 9.50.1587(MR1)) * 9.40 prior to vCR9.40.260616a (distributed in 9.40.3130(MR3)) * 9.30 prior to vCR9.30.260616a (distributed in 9.30.3983(MR5)) * 9.20 prior to vCR9.20.260616a (distributed in 9.20.4349(MR7)) * all versions of 9.10 and prior.

Uncaught Exception (CWE-248) in the T20 Readers allows an authenticated and authorized operator to trigger a restart by sending specific requests, resulting in a temporary denial of service. Version of Command Centre affected: * 9.50 prior to vCR9.50.260616a (distributed in 9.50.1587(MR1)) * 9.40 prior to vCR9.40.260616a (distributed in 9.40.3130(MR3)) * 9.30 prior to vCR9.30.260616a (distributed in 9.30.3983(MR5)) * 9.20 prior to vCR9.20.260616a (distributed in 9.20.4349(MR7)) * all versions of 9.10 and prior.

An Incorrect Privilege Assignment (CWE-266) vulnerability in the Command Centre Server allows an authenticated operator with limited privileges to perform some operations that they would not normally be authorized to perform. Version of Command Centre affected: 9.50 prior to vEL9.50.1587(MR1), 9.40 prior to vEL9.40.3130(MR3), 9.30 prior to vEL9.30.3983(MR5), 9.20 prior to vEL9.20.4349(MR7), all versions of 9.10.