CVE Feed

Cotonti Siena 0.9.26 and earlier contains a cross-site request forgery vulnerability that allows unauthenticated attackers to modify administrator configuration by tricking a logged-in administrator into submitting a forged POST request to the admin.php config update handler, which never invokes the application's CSRF validation function. Attackers can disable the PFS module's file extension whitelist by setting pfsfilecheck to 0, enabling any user with PFS access to upload and execute arbitrary PHP files on the server.

Hermes WebUI before 0.51.788 contains an unauthenticated remote code execution vulnerability that allows remote attackers to execute arbitrary shell commands by accessing the embedded terminal API endpoints without credentials. Attackers can create a session, attach a PTY shell, and write arbitrary commands through the terminal input endpoint to achieve full command execution as the server process user via four sequential unauthenticated HTTP requests.

Hermes WebUI before 0.51.307 contains an authentication bypass vulnerability that allows unauthenticated remote attackers to circumvent local-origin IP restrictions on onboarding endpoints by supplying a spoofed X-Forwarded-For header with a loopback address. Attackers can exploit this bypass to perform server-side request forgery against internal services including cloud metadata endpoints, overwrite LLM provider configuration and API keys with attacker-controlled values, or initiate OAuth device-code flows to obtain persistent access tokens stored in auth.json.

A Use of Incorrectly-Resolved Name or Reference vulnerability in the URL filtering plugin of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to bypass web filtering and access downstream resources that should be unreachable. If an MX Series device is configured with web filtering, and an attacker sends a request with a specifically formatted URL, this request will get forwarded despite the system being configured to block it. In turn, an attacker can access downstream resources that are expected to be unreachable. This issue affects Junos OS on MX Series: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S5, * 24.4 versions before 24.4R2-S4, * 25.2 versions before 25.2R2-S1, * 25.4 versions before 25.4R1-S2, 25.4R2.

An Improper Handling of Undefined Parameters vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on EX Series devices allows an authenticated attacker with low privileges to cause a Denial-of-Service (DoS). If an attempt is made to subscribe to an unsupported telemetry sensor path on EX2300, EX3400, EX4000, EX4100 and EX4400 via gRPC, this causes the FPC to crash. This leads to a complete service outage until the module has automatically restarted.  The following log message can be seen when this issue happens: agentd[<PID>]: AGENTD_RESOURCE_NOT_FOUND: No resource name found for <sensor> This issue affects Junos OS on EX2300, EX3400, EX4000, EX4100 and EX4400 devices: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S5, * 24.4 versions before 24.4R2.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on MX Series allows adjacent subscribers to bypass configured firewall filters. On MX Series devices with MPC10/11, LC4800/9600, and MX304 with subscribers configured on static interfaces, ingress firewall filters are not enforced, so that neither protocol level nor upstream bandwidth limitation are in effect.  This issue affects Junos OS on MX with MPC10/11, LC4800/9600/4802, and MX304: * 23.2 versions from 23.2R2-S1 before 23.2R2-S7, * 23.4 versions from 23.4R2 before 23.4R2-S7, * 24.2 versions before 24.2R2-S3, * 24.4 versions before 24.4R2-S2, * 25.2 versions before 25.2R2.

A Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). As part of the stateful traffic processing on SRX Series devices flows are being established, and removed when not needed anymore. During the removal process the timeout of a flow should be set to 3 seconds and consequentially the flow should be removed shortly after. Due to a race condition occurring when setting the timeout there is a chance (the exact conditions are outside the attackers control) that the timeout is instead set to a very high value of larger than 10,000 seconds: user@host> show security flow session | match timeout Session ID: 98784248524, Policy name: PROD-FLOW/4, HA State: Active, Timeout: 85250, Session State: Valid This will lead to an accumulation of flows which can be observed by an ever-increasing value of invalidated sessions in the output of 'show security flow session summary': user@host> show security flow session summary | match invalid Invalidated sessions: 216931These sessions can't be cleared manually with the 'clear security flow session' command, which will either lead to forwarding to stop (and the system needs to be manually recovered with a reboot) or to a flowd core and automatic reboot. This issue affects Junos OS on SRX Series: * 24.2 versions before 24.2R2-S3, * 24.4 versions before 24.4R2-S1, 24.4R2-S2, * 25.2 versions before 25.2R1-S2, 25.2R2. This issue does not affect releases earlier than 24.2R1;

A Missing Synchronization vulnerability in the flow collector handler of Juniper Networks Junos OS Evolved on QFX Series allows an adjacent, unauthenticated attacker to cause a Denial-of-Service (DoS). When the reachability of an sFlow collector changes, the corresponding next-hop entry is updated. If this update occurs simultaneously with the sFlow thread accessing the next-hop data (which is outside the attackers control), it causes the evo-pfemand process to crash, impacting all traffic forwarding until the automatic process restart has completed. This issue affects Junos OS Evolved on QFX Series: * all 23.2 versions,  * 23.4 versions before 23.4R2-S7-EVO, * 24.2 versions before 24.2R2-S5-EVO, * 24.4 versions before 24.4R2-S3-EVO, * 25.2 versions before 25.2R2-EVO.

An Improper Restriction of Communication Channel to Intended Endpoints vulnerability in Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to cause license exhaustion. Due to an incorrect initialization, a process which should only be able to communicate internally within the device, can be reached over the network via an open port. This leads to unauthorized access to the license management. This issue affects all Junos OS Evolved versions before 23.2R2-EVO.

A Missing Release of Memory after Effective Lifetime vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on specific EX Series devices allows an unauthenticated adjacent attacker to cause a Denial-of-Service (DoS).When sFlow is configured in a Virtual Chassis (VC) scenario with EX4100 Series or EX4400 Series devices, multicast traffic which is received on one VC member and sent out on another member leads to a memory leak and ultimately an FPC crash and restart. The leak can be monitored by watching the continuous increase of the buffer values in the output of: user@host> show chassis fpc This issue affects Junos OS on EX4100 Series and EX4400: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S7, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2.

An Improper Validation of Syntactic Correctness of Input vulnerability in the SIP plugin of Juniper Networks Junos OS on MX Series with SPC3 and SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).If the SIP ALG is enabled on an affected device, the processing of a malformed SIP invite packet will cause a flow processing daemon (flowd) crash and restart. This leads to a complete service outage until the system has automatically recovered. This issue affects Junos OS on MX Series with SPC3 and SRX Series: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S5, * 24.4 versions before 24.4R2-S4, * 25.2 versions before 25.2R2, * 25.4 versions before 25.4R1-S2.

A Return of Pointer Value Outside of Expected Range vulnerability in the fileio library of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privilged attacker to cause a Denial-of-Service (DoS). On EX Series, QFX Series and MX Series a low-privileged attacker issuing a specific 'show l2-learning' or 'show ethernet-switching' command will cause an l2ald crash which will lead to a temporary service impact for all layer 2 services until the process has automatically restarted. This issue affects EX Series, QFX Series, MX Series: Junos OS: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S7, * 24.2 versions before 24.2R2, * 24.4 versions before 24.4R1-S2. Junos OS Evolved: * all versions before 23.2R2-S7-EVO, * 23.4 versions before 23.4R2-S8-EVO, * 24.2 versions before 24.2R2-EVO, * 24.4 versions before 24.4R1-S3-EVO.

A Use of Multiple Resources with Duplicate Identifier vulnerability in the IKE daemon (iked) of Juniper Networks Junos OS on MX with SPC3 and SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). On an MX with SPC3 and SRX devices configured for VPN service, when a large number of VPN negotiations fail a peer index rollover will eventually occur. As a result, new peers are assigned index values that are already in use and the iked process starts to crash repeatedly. This results in failure to establish new VPN connections and rekeying existing ones. To restore service the system must be rebooted. Please note that the index value can't be monitored, so customers should monitor tunnel up and down events and if a lot of events occur over an extended period of time it becomes likely that this issue occurs. To be exposed to this issue the system needs to run iked (vs. kmd which is not affected), which can be verified with: user@host> show system processes extensive | match "KMD|IKED" This issue affects Junos OS on MX with SPC3, SRX Series: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S3, * 24.4 versions before 24.4R2-S4, * 25.2 versions before 25.2R1-S1.

An Improper Validation of Specified Quantity in Input vulnerability in the TCP proxy plugin of Juniper Networks Junos OS on MX Series with SPC3, and SRX Series allows an unauthenticated, network-based attacker to cause a complete Denial of Service (DoS). When TCP proxy is engaged in a flow session, to support ALGs, Advanced Anti-Malware, ICAP or UTM, a TCP packet with specifically malformed TCP header will cause flow processing daemon (flowd) to crash and restart. This causes a complete service outage until the system has automatically recovered. This issue affects Junos OS on MX with SPC3, and SRX Series:  * 23.4 versions before 23.4R2-S7,  * 24.2 versions before 24.2R2-S4,  * 24.4 versions before 24.4R2-S3, * 25.2 versions before 25.2R2. This issue does not affect releases before 23.4R1.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on MX with SPC3 and SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). When an affected device initiates a TCP connection to an attacker-controlled system that responds with a specific packet, this causes a PFE crash and restart, which affects all services until the system has automatically recovered. This issue can happen among others in the following scenarios: ALG, SSL proxy, UTM, RTLOG, AppQoE probing, AAMW, ICAP, URL filtering. This issue affects Junos OS on MX Series with SPC3, SRX5k Series with SPC3, SRX1600 Series, SRX2300 Series, SRX4000 Series, and vSRX Series: * all versions before 23.2R2-S4, * 23.4 versions before 23.4R2-S5, * 24.2 versions before 24.2R2.

An Out-of-bounds Write vulnerability in the http-gatekeeper (http-gk) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). If an SRX Series device is configured for remote-access VPN with pre-logon compliance check, a network-based attacker sending specifically formatted requests can trigger an out of bounds write leading to an http-gk process crash. This crash leads to unavailability of all services depending on the [ system services web-management ] configuration (like J-Web, remote access VPN and firewall authentication) until the process automatically restarts. This issue affects Junos OS on SRX Series: * 23.2 versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S4, * 25.2 versions before 25.2R2, * 25.4 versions before 25.4R1-S1, 25.4R2.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on QFX10000 Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS). On all QFX10000 platforms in an EVPN-VxLAN scenario, if an attacker sends IPv6 multicast traffic and these packets reach the non-IRB interface of a spine switch it floods the packet to other spines and all Ethernet Segment Identifier (ESI) leaf switches. This flooding causes the packet to be forwarded in a endless loop, which can lead to saturation of the involved links and in turn impact to legitimate traffic. This issue affects Junos OS on QFX10000 Series: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S4. This issue does not affect Junos version after 24.4 as the QFX10000 Series devices are not supported on newer versions anymore.

An Improper Validation of Specified Quantity in Input vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS). When a specific packet is received from device in the same broadcast domain, an affected system calculates the packet size incorrectly. This causes further packet processing to fail, which triggers an FPC major error, resulting in a FPC reset impacting traffic until the FPC has automatically recovered. Affected scenarios are: MAP-T, or non-IP traffic encapsulated in IP (e.g. MPLS over GRE). When this issue happens the following logs can be observed: fpc<#> CMError: /fpc/0/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_LI_INT_REG_UNROLL_TAIL_LENGTH_OVF (0x2205eb), scope: pfe, category: functional, severity: major, module: MQSS(0), type: LI: Unroll TAIL length overflow, oc_category: default fpc<#> Performing action reset-fru for error /fpc/0/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_LI_INT_REG_UNROLL_TAIL_LENGTH_OVF (0x2205eb) in module: MQSS(0) with scope: pfe category: functional level: major, oc_category: default This issue affects Junos OS on MX Series: * all versions before 23.2R2-S6, * 23.4 versions before 23.4R2-S7, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S4, * 25.2 versions before 25.2R2.

OpenFGA is an authorization/permission engine built for developers. Prior to 1.18.0, OpenFGA's OIDC authenticator skipped JWT audience validation when authn.method was set to oidc, authn.oidc.issuer was configured, and authn.oidc.audience was not set, allowing a token minted for an unrelated service by the same identity provider to authenticate to OpenFGA. This issue is fixed in 1.18.0.

DeepSeek MCP Server is an MCP server for DeepSeek V4. Starting in version 1.4.2 and prior to version 1.8.0, the self-hosted HTTP transport of `@arikusi/deepseek-mcp-server` exposes `POST /mcp` without any authentication: `createMcpExpressApp` is called without an `authProvider` and no middleware guards the route, so any network-reachable client can issue an unauthenticated `initialize` request and obtain a valid MCP session identifier. In reproduced testing against commit `5e1302171e99`, an unauthenticated client was able to initialize a session, enumerate tools, and invoke the local `deepseek_sessions` tool with no credentials. The same unauthenticated session also exposes `deepseek_chat`, whose handler uses the server-side `DEEPSEEK_API_KEY` when self-hosted deployments configure one. This issue applies to self-hosted HTTP mode, not the separately documented hosted BYOK endpoint in `README.md`, which expects an `Authorization: Bearer ...` header. Upstream self-hosted container assets enable HTTP mode by default (`Dockerfile`) and publish port `3000` (`docker-compose.yml`). Version 1.8.0 contains a patch for this issue.

DeepSeek MCP Server is an MCP server for DeepSeek V4. Starting in version 1.4.2 and prior to version 1.7.0, the process-global `SessionStore` accepts caller-supplied `session_id` values without binding them to any authenticated principal or transport session. An attacker can enumerate active session IDs via `deepseek_sessions`, then reuse a victim-controlled `session_id` in `deepseek_chat` to retrieve and continue the victim's conversation context. Version 1.7.0 contains a patch.

Discourse is an open-source discussion platform. Prior to 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5, a topic "featured link" was not sufficiently normalized and escaped before being rendered in the topic list, allowing a user who can set a featured link to inject JavaScript when default Content Security Policy protections were modified or disabled. This issue is fixed in versions 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5.

OpenFGA is an authorization/permission engine built for developers. Prior to 1.18.0, when MySQL is being used as the datastore and authorization decisions rely on case-sensitive user strings, the tuple, changelog, and authorization_model identifier columns can compare case-distinct values such as user:Alice and user:alice as equivalent, causing two distinct check requests to return the same response. This issue is fixed in 1.18.0.

Discourse is an open-source discussion platform. Prior to 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5, a malicious second factor name on an attacker-controlled account was not escaped in the delete confirmation dialog, allowing stored cross-site scripting when an administrator impersonated that account. This issue is fixed in versions 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5.

Discourse is an open-source discussion platform. Prior to 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5, insufficient SVG sanitization in upload and user avatar handling could lead to cross-site scripting when a user visited specific URLs that are not normally part of community browsing. This issue is fixed in versions 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5.

Discourse is an open-source discussion platform. Prior to 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5, the AWS SES bounce webhook at POST /webhooks/aws verified that SNS messages were signed by Amazon but did not bind them to trusted TopicArn values, allowing any AWS account holder to publish validly signed forged Bounce notifications that revoke a targeted user email. This issue is fixed in versions 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5.

Discourse is an open-source discussion platform. Prior to 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5, restricted tag and tag-group names attached to publicly readable categories as allowed_tags, allowed_tag_groups, or required tag groups could leak to anonymous and unauthorized users through category and group endpoints. This issue is fixed in versions 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5.

Discourse is an open-source discussion platform. Prior to 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5, regular users could route direct S3 multipart uploads through ExternalUploadManager into the admin backup store. This issue is fixed in versions 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5.

Discourse is an open-source discussion platform. Prior to 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5, secure uploads could be exposed by pull_hotlinked_images when an attacker knew the secured upload URL and the secure_uploads site setting was enabled. This issue is fixed in versions 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5.

Discourse is an open-source discussion platform. Prior to 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5, EventSerializer could expose invited group names, sample invitees, and attendance statistics to users who could view the topic but were not entitled to view the private event invitee list. This issue is fixed in versions 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5.

Discourse is an open-source discussion platform. Prior to 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5, the signup flow could allow newly registered users to set primary_group_id and gain whisper-group privileges without legitimate group membership on sites with whispers_allowed_groups configured. This issue is fixed in versions 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5.

decompress before 4.2.2 allows arbitrary symlink creation during archive extraction. When processing symlink entries (type === 'symlink'), the x.linkname field from the archive is passed directly to fs.symlink() without validation (index.js line 121). The preventWritingThroughSymlink check on line 98 only applies to file entries, not symlink creation. An attacker can craft an archive with symlink entries pointing to sensitive files outside the extraction directory (e.g., /etc/passwd), enabling information disclosure when the application reads the extracted contents.

decompress before 4.2.2 contains an improper path containment check that enables directory traversal and arbitrary file write. The safeMakeDir function (index.js line 29) and the extraction path validation (index.js line 106) use String.indexOf() to verify the resolved path is within the output directory: realDestinationDir.indexOf(realOutputPath) !== 0. This check is flawed because it does not enforce a path separator boundary. For example, "/tmp/app_config".indexOf("/tmp/app") returns 0, incorrectly passing the check even though /tmp/app_config is outside /tmp/app. Combined with the unvalidated symlink creation in the same package, an attacker can write arbitrary files to directories adjacent to the extraction target. This is a bypass of the fix for CVE-2020-12265. The correct check requires appending a path separator: realParentPath.indexOf(realOutputPath + path.sep) !== 0.

decompress before 4.2.2 allows arbitrary hardlink creation during archive extraction, enabling file read disclosure and file corruption. When processing hardlink entries (type === 'link'), the x.linkname field from the archive is passed directly to fs.link() without validation (index.js line 113). An attacker can craft an archive with a hardlink entry whose linkname is an absolute path to any file on the same filesystem. This creates a hardlink inside the extraction directory that shares the same inode as the target file, enabling both reading and overwriting the original file's content. Hardlinks are limited to files on the same filesystem and cannot target directories.

An integer overflow in the jbig2_arith_iaid_ctx_new() function of Artifex commit cc37d0 allows attackers to cause a Denial of Service (DoS) via a crafted input.

An Improper Restriction of Communication Channel to Intended Endpoints vulnerability in Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to cause a limited information disclosure and availability impact to the device. Due to a wrong initialization, a process which should only be able to communicate internally within the device can be reached over the network via an open port. This leads to a device being inadvertently exposed and increased CPU cycles spent processing ingress packets. This issue affects Junos OS Evolved: * all versions before 23.2R2-S7-EVO, * 23.4 versions before 23.4R2-S8-EVO, * 24.2 versions before 24.2R2-S5-EVO, * 24.4 versions before 24.4R2-S4-EVO, * 25.2 versions before 25.2R2-S1-EVO, * 25.4 versions before 25.4R1-S2-EVO.

A Missing Authorization vulnerability in the CLI of Juniper Networks Junos OS on EX Series allows a local, authenticated attacker to cause a Denial-of-Service (DoS). On EX2300, EX4000, EX4100, EX4300-MP (Multigigabit) and EX4400 switches, an authenticated, local attacker with no specific permissions or class can execute a specific, privileged CLI 'request' command which will cause complete traffic impact until the system automatically recovers. This issue affects Junos OS on EX2300, EX4000, EX4100, EX4300-MP (Multigigabit) and EX4400: * 23.2R2 versions before 23.2R2-S6, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S3, * 25.2 versions before 25.2R2, * 25.4 versions before 25.4R1-S1.

A flaw has been found in pdeljanov Symphonia up to 0.6.0. This vulnerability affects unknown code of the component Metadata Handler. This manipulation causes denial of service. The attack needs to be launched locally. The exploit has been published and may be used. The pull request to fix this issue awaits acceptance.

A vulnerability was detected in lo48576 fbxcel up to 0.9.0. This affects an unknown part of the file src/pull_parser/v7400/parser.rs of the component Node Header Handler. The manipulation results in denial of service. The attack must be initiated from a local position. The exploit is now public and may be used. The pull request to fix this issue awaits acceptance.

A security vulnerability has been detected in TOTOLINK A3000RU, A3100R, A950RG, AC1200T10, CP450, CS185R_T10 and EX200 up to 20260906. Affected by this issue is some unknown functionality of the file /etc/boa/boa.conf of the component Web Interface. The manipulation leads to least privilege violation. The attack may be initiated remotely. The attack's complexity is rated as high. The exploitation is known to be difficult.