CVE Feed

Consul Community Edition and Consul Enterprise 1.2.0 through 2.0.2 are vulnerable to an uncontrolled resource consumption issue in the Connect CA roots endpoint that may allow a remote caller to grow the agent's Connect CA roots cache without bound, defeating the operator's cache-disable configuration. This vulnerability, CVE-2026-19015, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3.

Consul Community Edition and Consul Enterprise 1.17.0 through 2.0.2 are vulnerable to an uncontrolled resource consumption issue in the Connect authorization endpoint that may allow a caller to grow the agent's intention-match cache without bound, defeating the operator's cache-disable configuration. This vulnerability, CVE-2026-190124, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3.

Consul Community Edition and Consul Enterprise 1.18.0 through 2.0.2 are vulnerable to an authenticated denial of service in the Enterprise-to-Community Edition downgrade path that may allow an authorized caller to crash the Consul server. A caller with config-entry write permission can submit a service-router configuration entry that causes the agent to exit unexpectedly. This vulnerability, CVE-2026-19012, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3.

Consul Community Edition and Consul Enterprise 1.13.0 through 2.0.2 are vulnerable to an unauthenticated denial of service through unbounded connection acceptance on the external gRPC listeners. A remote attacker may exhaust agent file descriptors, goroutines, and memory by opening many incomplete connections, potentially preventing legitimate clients from connecting. This vulnerability, CVE-2026-15972, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3.

Consul Community Edition and Consul Enterprise 1.20.1 through 2.0.2 are vulnerable to an L7 intention authorization bypass when a service proxy is configured with a custom public listener. An authenticated mesh workload may reach HTTP paths that are blocked by a path-based deny intention. This vulnerability, CVE-2026-15970, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3.

pypdf is a free and open-source pure-python PDF library. Prior to 6.15.0, a crafted PDF can cause long runtimes and large memory consumption when pypdf/_font.py function Font._collect_cid_character_widths expands unusually large CID font /W width ranges or excessive width entries during text extraction. This issue is fixed in 6.15.0.

crypto-js is a JavaScript library of crypto standards. Versions of crypto-js prior to 4.0.0 generate randomness in CryptoJS.lib.WordArray.random() using a custom variation of the Multiply-With-Carry pseudorandom number generator, seeded from Math.random(), instead of a cryptographically secure source. This generator was introduced in version 3.1.2-4 and remained present in nearly every 3.x release. Nominal requests for 128 or 256 bits of entropy through this function produce effective search spaces of approximately 2 to the 39th and 2 to the 47th possibilities, small enough to enumerate on commodity hardware. Downstream wallet applications that used CryptoJS.lib.WordArray.random() as the entropy source for BIP39 recovery phrases are affected, and an attacker who enumerates the reduced output space can recover the resulting private keys and control the associated funds. This issue is fixed in version 4.0.0.

Hono is a Web application framework that provides support for any JavaScript runtime. From 3.8.0 to 4.12.33, memo() from hono/jsx retains the result of a server side render and reuses it for later renders with comparator equal props, and request scoped values read inside the component take no part in that comparison, so a response can contain HTML rendered for another user's request. Components wrapped with memo() are compared by props alone; values read implicitly during rendering, such as JSX Context through createContext() and useContext(), useRequestContext() from hono/jsx-renderer, and getContext() from hono/context-storage, do not participate, and the retained result lives as long as the wrapped component, so it outlives the request that produced it. A user may receive a response containing HTML rendered for another user when both render the same memoized component with comparator equal props on the same warm instance, which may disclose another user's account or profile data, disclose request scoped secrets embedded in HTML such as CSRF tokens, or expose role specific content to users who should not receive it. This issue is fixed in version 4.12.34.

Hono is a Web application framework that provides support for any JavaScript runtime. From 4.7.0 to 4.12.33, the Proxy Helper proxy() function in hono/proxy does not remove response headers named by the origin's Connection header. Per RFC 9110 Section 7.6.1, an intermediary must remove the header fields listed in a message's Connection header field before forwarding the message, in addition to the well known hop by hop headers, but the proxy() function only removed the well known hop by hop headers, including Connection itself, from origin responses. A client may therefore receive response headers that the origin intended only for its immediate peer, disclosing connection scoped or internal metadata contained in such headers, when an application proxies responses from an origin that declares additional, non standard headers as hop by hop via the Connection response header. This issue is fixed in version 4.12.34.

Hono is a Web application framework that provides support for any JavaScript runtime. From 4.12.0 to 4.12.33, the languageDetector middleware is vulnerable to algorithmic complexity denial of service when processing a crafted language tag containing a large number of hyphen separated subtags. To implement progressive language tag truncation, normalizeLanguage() repeatedly calls parts.slice(0, i).join('-') for every possible prefix, so the total amount of string processing grows quadratically with the number of subtags. Language values may come from a query parameter, cookie, Accept-Language header, or URL path, depending on the detector configuration, and the default detector order enables query string, cookie, and header detection, so applications using languageDetector() may expose this processing to unauthenticated requests. An attacker may repeatedly send requests containing long, hyphen separated language tags, causing excessive CPU consumption and preventing unrelated requests from being processed. This issue is fixed in version 4.12.34.

Ruby JSON is a JSON implementation for Ruby. From 2.20.0 until 2.21.2, Ruby's JSON native C extension clears the consumed JSON::ResumableParser input buffer but leaves state.start, state.cursor, and state.end pointing into released storage. When partial_value reconstructs an incomplete object containing duplicate keys, the duplicate-key warning path calls cursor_position, which dereferences those stale pointers. This results in a heap-use-after-free and can terminate the Ruby process. An attacker who can supply JSON stream data to an application using JSON::ResumableParser may cause process termination when the application calls partial_value on incomplete attacker-controlled input containing duplicate object keys. This issue has been fixed in version 2.21.2.

TestLink 1.9.20 and prior contains an insecure direct object reference vulnerability that allows any authenticated user, including low-privilege guest accounts, to read arbitrary attachments by supplying an integer attachment ID to the attachmentdownload.php handler without any project or role authorization check. Attackers can enumerate sequential integer IDs through the attachment download endpoint to retrieve file contents from private projects they have no membership in, bypassing the per-project access control model and exposing test specifications, requirements documents, execution evidence, and other sensitive uploaded files across the entire installation.

Kirby is an open-source content management system. Prior to 4.9.5 and from 5.0.0 through 5.5.1, the REST API error handler can return unsanitized PHP error messages that expose the full filesystem path of the Kirby installation to unauthenticated API users. This vulnerability affects all Kirby sites that have not disabled the REST API with the 'api' => false option. This issue is fixed in versions 4.9.5 and 5.5.2.

Frappe is a full-stack web application framework. Prior to 16.23.0 and 15.112.0, Document Follow notification generation does not re-evaluate the recipient's current document permissions, allowing users whose access was revoked or reduced to continue receiving document data by email. This issue is fixed in versions 16.23.0 and 15.112.0.

NexTor IP Changer is a command-line tool that leverages the Tor network to periodically rotate a user's IP address. Versions prior to 2.0.0 execute privileged system commands using `sudo` and `shell=True` directly inside application logic. In environments where passwordless sudo (`NOPASSWD`) is enabled, privileged commands may execute silently without explicit user confirmation. Version 2.0.0 fixes the issue.

NexTor IP Changer is a command-line tool that leverages the Tor network to periodically rotate a user's IP address. Versions prior to 2.0.0 have a command execution vulnerability due to unsafe use of `shell=True` with commands that rely on executable resolution through the `PATH` environment variable. An attacker controlling the execution environment can place malicious executables such as sudo earlier in the `PATH`, resulting in execution of attacker-controlled code. Version 2.0.0 fixes the issue.

A security flaw has been discovered in SourceCodester Simple Doctors Appointment System 1.0. This vulnerability affects unknown code of the file /admin/ajax.php?action=delete_appointment. The manipulation of the argument ID results in sql injection. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was identified in SourceCodester Photo Share Website 1.0. This affects an unknown part of the file /social/ajax.php?action=save_upload of the component Comment Input Box. The manipulation of the argument content leads to cross site scripting. The attack may be initiated remotely. The exploit is publicly available and might be used.

File::Rotate::Simple versions before 0.4.0 for Perl create the target of dangling symlinks when rotating files. When the file to be rotated is a symbolic link to a missing file, and the touch option is enabled, then the rotate method assumes that the file is absent (since the existence check is against the target), and does not rotate it. But it touches the file, which creates the target. An attacker that has the ability to create the symlink can use this to create an arbitrary file with permissions of the process rotating the files (which may be different from the process that normally writes to the log file that is being rotated). Note that the touch option is disabled by default.

Grav CMS's scheduler-webhook plugin contains an authentication bypass in the webhook token check. When the webhook feature is enabled but no webhookToken is configured, a compound conditional short-circuits and skips token validation, so an unauthenticated remote attacker who can reach POST /scheduler/webhook can trigger the operator's already-configured scheduled jobs by sending a single request. The primitive is triggering-existing-jobs, not attacker-chosen command execution: the attacker controls when the jobs run and which one runs (via ?job=), but does not control what the jobs do. Code execution follows only when the operator has configured a job that shells out, and even then the attacker controls timing rather than payload. Not a default-install issue: reaching the endpoint requires the separate scheduler-webhook GPM plugin to be installed, scheduler.modern.webhook.enabled to be true (default false), and no webhookToken to be configured; a stock Grav or Grav-Admin install exposes nothing here.

Malformed or out-of-sequence frames at the Aviation Very High Frequency Link Control X.25 layers cause repeated resets which may result in increased workload and reduced situational awareness. This type of attack can be carried out remotely over radio frequency.

Injection of false emergency or status messages over CPDLC may lead to misallocation of resources, operational confusion, and improper response actions by flight crews, traffic controllers, and ground operations. This type of attack can be carried out remotely over radio frequency.

Broadcast control frames can disconnect multiple aircraft simultaneously leading to delayed clearances and air traffic controller overload. This type of attack can be carried out remotely over radio frequency.

Unnumbered Disconnect (U DISC) and malformed Aviation Very High Frequency Link Control frames can terminate sessions and lead to a loss of CPDLC functions requiring a reversion to voice communication and increased controller workload. This type of attack can be carried out remotely over radio frequency.

Lack of authentication for Very High Frequency Data Link messages allows rogue ground stations to inject CPDLC messages leading to unexpected or misleading clearances and potential pilot confusion. This type of attack can be carried out remotely over radio frequency.

Frappe is a full-stack web application framework. Prior to 16.20.0 and 15.112.0, unrestricted access to a Document Follow API (update_follow) is possible for an authenticated user. This issue is fixed in versions 16.20.0 and 15.112.0.

WordPress is vulnerable to a pre-auth reflected XSS vulnerability on the login screen. Via a specially crafted malicious third-party website hosted by an attacker, it is possible for this to be escalated to an RCE vulnerability with conditions outside of the attackers control. This requires successful social engineering of and explicit interaction by the target victim. This issue affects all versions of WordPress. Version 7.0.3 has been released, containing a fix for the vulnerability, and as a courtesy to users on older branches the fix has been backported to all branches back to 4.7. Discovered and responsibly disclosed by [the team at pwn.ai](https://pwn.ai/).

Improper privilege management in the XML-RPC API of Plesk before 18.0.80, allows an authenticated reseller to obtain an administrative session for the root user account.

An SQL injection vulnerability in Plesk Obsidian up to 18.0.80 for Linux and Windows allows an authenticated user to read arbitrary data from the panel database.

Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, the RedisArrayAggregator Redis codec clears retained partial aggregate state when the maxNestedArrayDepth limit is exceeded, but it does not clear the same state when the sibling maxElements limit is exceeded. A peer can start a valid RESP array, send a bulk string child, then send a nested array header longer than the configured maxElements. Netty throws a decoder exception in decodeRedisArrayHeader, but the existing partial aggregate remains retained in the handler. If the application leaves the channel alive after the exception, later messages are still consumed into the pre-error aggregate, allowing an unauthenticated peer to keep attacker-controlled aggregate state alive across a security-limit exception and pin retained pooled buffers. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final.

In versions of the Datadog Android application prior to v545-5.9.2, the app tags Crashlytics data with the user's Datadog UUID, with no user-facing opt-out. Impact: The Datadog user UUID and crash data are visible within Firebase Crashlytics. This UUID is not identifying outside Datadog's own systems.

In versions of the Datadog Android application prior to v541-5.9.2, the exported launcher activity AppActivity accepts an attacker-supplied session (including OAuth tokens) from Intent extras with no permission guard, and signs the app into that session without validating it against the backend. This requires a malicious application co-installed on a device with the Datadog app installed, and an OAuth token the attacker is willing to load into the victim's app. Impact: A co-installed application can switch the victim's Datadog app to a session the attacker controls. This is an account-confusion issue; it does not by itself expose the victim's existing session or data.

In versions of the Datadog Android application prior to v554-5.9.4, two Room-backed SQLite databases store sensitive content in plaintext: LocalNotificationDatabase (notification title, message, recipient, service, tags, and on-call/incident deep links) and SearchRecentDatabase (the user's full in-app search history). Impact: Any actor able to bypass the app sandbox can read these databases in plaintext.

In versions of the Datadog Android application prior to v541-5.9.2, BubbleChatActivity is exported with no permission guard and accepts a SEND intent with a caller-supplied conversation_id. When the activity closes and no in-process session matches that ID, it unconditionally cancels notification ID 9201 (the Bits AI chat notification), with no check on the caller's identity or ownership of the conversation. This requires a malicious application co-installed on the victim's device. Impact: A co-installed application can silently dismiss the victim's Bits AI chat notification. No chat content is exposed; conversation data remains server-authentication gated and is never returned to the caller.

In versions of the Datadog Android application prior to v545-5.9.2, six App Widget configuration activities (IncidentWidgetActivity, MonitorSavedViewWidgetActivity, OnCallShiftsWidgetActivity, OnCallPagesWidgetActivity, SloWidgetActivity, DashboardWidgetActivity) are exported with no permission guard. Each accepts a caller-supplied AppWidgetManager.EXTRA_APPWIDGET_ID and, when no deep-link destination is resolved, uses it to load the matching widget's stored session and automatically log in as that user. Because Android widget IDs are small sequential integers, a co-installed application can brute-force this value to find one that matches a widget configured on the victim's device. This requires: A malicious application co-installed on the victim's device. At least one of the six widgets configured on the victim's home screen. An active Datadog session cached locally. Impact: The matching configuration activity opens in the foreground under the victim's session and renders live infrastructure data. Exposure is limited to a visual side channel (e.g., screen recording or accessibility services); the calling application cannot programmatically read the rendered data.

In versions of the Datadog Android application prior to v545-5.9.2, OnCallNotificationActivity is declared exported with no permission guard. A co-installed application can launch it with attacker-controlled Intent extras, including a full-screen lock-screen message, an arbitrary on-call page ID, and an arbitrary Intent to run inside the Datadog process. This requires: A malicious application co-installed on the victim's device. An active Datadog session in the Android app. Impact: After a single tap on the Acknowledge button, the app sends a forged on-call acknowledgement to the backend under the victim's session, launches the attacker-supplied Intent from within the Datadog process (reaching otherwise non-exported components), and turns on the screen while dismissing the keyguard.

A vulnerability was determined in SourceCodester Online Clothing Store. Affected by this issue is some unknown functionality of the file /_notes/ of the component Dreamweaver Metadata Files. Executing a manipulation can lead to file and directory information exposure. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was identified in WonderTrader up to 0.9.9. Affected is the function _undone_qty in the library src/WtCore/TraderAdapter.h of the component Pending Order Handler. The manipulation of the argument getUndoneQty leads to enforcement of behavioral workflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

Imager versions from 0.45_02 before 1.034 for Perl may expose adjacent heap bytes via strlen() over-read from zero-count ASCII EXIF entries in copy_string_tags. copy_string_tags() computes an ASCII EXIF tag's length as `entry->size - 1` to strip the trailing NUL. A zero-count ASCII entry sets `entry->size` to 0, and the derived length reaches i_tags_add() as -1, which is interpreted as a request to call strlen(), scanning past the entry to the next NUL and copying those bytes into the tag. JPEG reaches this path via im_decode_exif(), as does the separate Imager::File::WEBP distribution, which is fixed by upgrading Imager. Any caller of Imager->read() on an attacker-supplied image with such an entry may receive an exif_* tag holding adjacent heap bytes instead of an empty string.