CVE Feed

A vulnerability was identified in Enter Software Iperius Backup up to 8.7.2. This impacts an unknown function of the file IperiusAccounts.ini. Such manipulation leads to use of hard-coded cryptographic key . The attack must be carried out locally. This attack is characterized by high complexity. The exploitability is said to be difficult. The exploit is publicly available and might be used. Upgrading to version 8.7.4 will fix this issue. It is suggested to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.

Tina is a headless content management system. Prior to version 2.2.2, @tinacms/graphql uses string-based path containment checks in FilesystemBridge. That blocks plain ../ traversal, but it does not resolve symlink or junction targets. If a symlink/junction already exists under the allowed content root, a path like content/posts/pivot/owned.md is still considered "inside" the base even though the real filesystem target can be outside it. As a result, FilesystemBridge.get(), put(), delete(), and glob() can operate on files outside the intended root. This issue has been patched in version 2.2.2.

Tina is a headless content management system. Prior to version 2.2.2, @tinacms/cli recently added lexical path-traversal checks to the dev media routes, but the implementation still validates only the path string and does not resolve symlink or junction targets. If a link already exists under the media root, Tina accepts a path like pivot/written-from-media.txt as "inside" the media directory and then performs real filesystem operations through that link target. This allows out-of-root media listing and write access, and the same root cause also affects delete. This issue has been patched in version 2.2.2.

Docker Model Runner (DMR) is software used to manage, run, and deploy AI models using Docker. Prior to version 1.1.25, Docker Model Runner contains an SSRF vulnerability in its OCI registry token exchange flow. When pulling a model, Model Runner follows the realm URL from the registry's WWW-Authenticate header without validating the scheme, hostname, or IP range. A malicious OCI registry can set the realm to an internal URL (e.g., http://127.0.0.1:3000/), causing Model Runner running on the host to make arbitrary GET requests to internal services and reflect the full response body back to the caller. Additionally, the token exchange mechanism can relay data from internal services back to the attacker-controlled registry via the Authorization: Bearer header. This issue has been patched in version 1.1.25. For Docker Desktop users, enabling Enhanced Container Isolation (ECI) blocks container access to Model Runner, preventing exploitation. However, if the Docker Model Runner is exposed to localhost over TCP in specific configurations, the vulnerability is still exploitable.

Notesnook is a note-taking app focused on user privacy & ease of use. Prior to version 3.3.17, a stored XSS vulnerability exists in the mobile share / web clip flow because attacker-controlled clip metadata is concatenated into HTML without escaping and then rendered with innerHTML inside the mobile share editor WebView. An attacker can control the shared title metadata (for example through Android/iOS share metadata such as TITLE / SUBJECT, or through link-preview title data) and inject HTML such as </a><img src=x onerror=...>. When the victim opens the Notesnook share flow and selects Web clip, the payload is inserted into the generated HTML and executed in the mobile editor WebView. This issue has been patched in version 3.3.17.

Tina is a headless content management system. Prior to version 2.2.2, a path traversal vulnerability in @tinacms/graphql allows unauthenticated users to write and overwrite arbitrary files within the project root. This is achieved by manipulating the relativePath parameter in GraphQL mutations. The impact includes the ability to replace critical server configuration files and potentially execute arbitrary commands by sabotaging build script. This issue has been patched in version 2.2.2.

An issue was discovered in DedeCMS 5.7.118 allowing attackers to execute code via crafted setup tag values in a module upload.

pandas-ai v3.0.0 was discovered to contain a SQL injection vulnerability via the pandasai.agent.base._execute_sql_query component.

An unauthenticated remote code execution (RCE) vulnerability exists in applications that use the Replicator node package manager (npm) version 1.0.5 to deserialize untrusted user input and execute the resulting object.

A vulnerability in the Metadata update feature of Cisco Nexus Dashboard Insights could allow an authenticated, remote attacker to write arbitrary files to an affected system. This vulnerability is due to insufficient validation of the metadata update file. An attacker could exploit this vulnerability by crafting a metadata update file and manually uploading it to an affected device. A successful exploit could allow the attacker to write arbitrary files to the underlying operating system as the&nbsp;root user. To exploit this vulnerability, the attacker must have valid administrative credentials. Note: Manual uploading of metadata files is typical for Air-Gap environments but not for Cisco Intersight Cloud connected devices. However, the manual upload option exists for both deployments.

A vulnerability in Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected SSM On-Prem host. This vulnerability is due to the unintentional exposure of an&nbsp;internal service. An attacker could exploit this vulnerability by sending a crafted request to the API of the exposed service. A successful exploit could allow the attacker to execute commands on the underlying operating system with root-level privileges.

A vulnerability in the web-based management interface of Cisco Evolved Programmable Network Manager (EPNM) could allow an authenticated, remote attacker with low privileges to access sensitive information that they are not authorized to access. This vulnerability is due to improper authorization checks on a REST API endpoint of an affected device.&nbsp;An attacker could exploit this vulnerability by querying the affected endpoint. A successful exploit could allow the attacker to view session information of active Cisco EPNM users, including users with administrative privileges, which could result in the affected device being compromised.

A vulnerability in the web interface of Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an authenticated, remote attacker to elevate privileges on an affected system. This vulnerability is due to the improper transmission of sensitive user information. An attacker could exploit this vulnerability by sending a crafted message to an affected Cisco SSM On-Prem host and retrieving session credentials from subsequent status messages. A successful exploit could allow the attacker to elevate privileges on the affected system from low to administrative. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of System User. Note: This vulnerability exposes information only about users who logged in to the Cisco SSM On-Prem host using the web interface and who are currently logged in. SSH sessions are not affected.

A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with admin-level privileges to execute arbitrary code as the root user.&nbsp;This vulnerability is due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system as the root user. Cisco has assigned this vulnerability a SIR of High rather than Medium as the score indicates because additional security implications could occur when the attacker becomes root.

A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with admin-level privileges to perform command injection attacks on an affected system and&nbsp;execute arbitrary commands as the root user. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user. Cisco has assigned this vulnerability a Security Impact Rating (SIR) of High, rather than Medium as the score indicates, because additional security implications could occur once the attacker has become root.

A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with admin-level privileges to perform command injection attacks on an affected system and&nbsp;execute arbitrary commands as the root user. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user. Cisco has assigned this vulnerability a Security Impact Rating (SIR) of High, rather than Medium as the score indicates, because additional security implications could occur once the attacker has become root.

A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with read-only privileges to perform command injection attacks on an affected system and execute arbitrary commands as the root user. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user.

A vulnerability in the change password functionality of Cisco Integrated Management Controller (IMC) could allow an unauthenticated, remote attacker to bypass authentication and gain access to the system as&nbsp;Admin. This vulnerability is due to incorrect handling of password change requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to bypass authentication, alter the passwords of any user on the system, including an&nbsp;Admin user, and gain access to the system as that user.

A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with administrative privileges to conduct a stored XSS attack against a user of the interface. This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by persuading a user of an affected interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the browser of the targeted user or access sensitive, browser-based information.

A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with administrative privileges to conduct a stored XSS attack against a user of the interface. This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by persuading a user of an affected interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the browser of the targeted user or access sensitive, browser-based information.

A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with administrative privileges to conduct a stored XSS attack against a user of the interface. This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by persuading a user of an affected interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the browser of the targeted user or access sensitive, browser-based information.

A vulnerability in the web-based management interface of Cisco IMC could allow an unauthenticated, remote attacker to conduct a reflected XSS attack against a user of the interface. This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by persuading a user of an affected interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the browser of the targeted user or access sensitive, browser-based information.

A vulnerability in the configuration backup feature of Cisco Nexus Dashboard could allow an attacker who has the encryption password and access to Full or Config-only backup files to access sensitive information. This vulnerability exists because authentication details are included in the encrypted backup files. An attacker with a valid backup file and encryption password from an affected device could decrypt the backup file. The attacker could then use the authentication details in the backup file to access internal-only APIs on the affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user.

A vulnerability in Cisco Nexus Dashboard and Cisco Nexus Dashboard Insights could allow an unauthenticated, remote attacker to conduct a server-side request forgery (SSRF) attack through an affected device. This vulnerability is due to improper input validation for specific HTTP requests. An attacker could exploit this vulnerability by persuading an authenticated user of the device management interface to click a crafted link. A successful exploit could allow the attacker to send arbitrary network requests that are sourced from the affected device to an attacker-controlled server. The attacker could then execute arbitrary script code in the context of the affected interface or access sensitive browser-based information.

A command injection vulnerability in the component /jmreport/show of jeecg boot v3.0.0 to v3.5.3 allows attackers to execute arbitrary code via a crafted HTTP request.

There is an injection vulnerability in jeecg boot versions 3.0.0 to 3.5.3 due to lax character filtering, which allows attackers to execute arbitrary code on components through specially crafted HTTP requests.

Improper access control in the multi-factor authentication (MFA) management API in Devolutions Server allows an authenticated attacker to delete their own configured MFA factors and reduce account protection to password-only authentication via crafted HTTP requests.  This issue affects Server: from 2026.1.6 through 2026.1.11.

Improper input validation in the gateway health check feature in Devolutions Server allows a low-privileged authenticated user to perform server-side request forgery (SSRF), potentially leading to information disclosure, via a crafted API request. This issue affects Server: from 2026.1.1 through 2026.1.11, from 2025.3.1 through 2025.3.17.

Exposure of sensitive information in the users MFA feature in Devolutions Server allows users with user management privileges to obtain other users OTP keys via an authenticated API request. This issue affects Server: from 2026.1.6 through 2026.1.11.

Improper access control in the users MFA feature in Devolutions Server allows an authenticated user to bypass administrator-enforced restrictions and remove their own multi-factor authentication (MFA) configuration via a crafted request. This issue affects Server: from 2026.1.6 through 2026.1.11.

Improper authentication in the two-factor authentication (2FA) feature in Devolutions Server 2026.1.11 and earlier allows a remote attacker with valid credentials to bypass multifactor authentication and gain unauthorized access to the victim account via reuse of a partially authenticated session token.

Improper authentication in the external OAuth authentication flow in Devolutions Server 2026.1.11 and earlier allows an authenticated user to authenticate as other users, including administrators, via reuse of a session code from an external authentication flow.

Improper authentication in the OAuth login functionality in Devolutions Server 2026.1.11 and earlier allows a remote attacker with valid credentials to bypass multi-factor authentication via a crafted login request.

Lakeside SysTrack Agent 11 before 11.5.0.15 has a race condition with resultant local privilege escalation to SYSTEM. The fixed versions are 11.2.1.28, 11.3.0.38, 11.4.0.24, and 11.5.0.15.

OpenClaw before 2026.3.22 contains a path traversal vulnerability in Windows media loaders that accepts remote-host file URLs and UNC-style paths before local-path validation. Attackers can exploit this by providing network-hosted file targets that are treated as local content, bypassing intended access restrictions.

TOTOlink A3600R v5.9c.4959 contains a buffer overflow vulnerability in the setAppEasyWizardConfig interface of /lib/cste_modules/app.so. The vulnerability occurs because the rootSsid parameter is not properly validated for length, allowing remote attackers to trigger a buffer overflow, potentially leading to arbitrary code execution or denial of service.

The login mechanism of Sage DPW 2025_06_004 displays distinct responses for valid and invalid usernames, allowing enumeration of existing accounts in versions before 2021_06_000. On-premise administrators can toggle this behaviour in newer versions.

The login mechanism of Sage DPW 2021_06_004 displays distinct responses for valid and invalid usernames, allowing enumeration of existing accounts in versions before 2021_06_000. On-premise administrators can toggle this behavior in newer versions.

A non-default configuration in Sage DPW 2025_06_004 allows unauthenticated access to diagnostic endpoints within the Database Monitor feature, exposing sensitive information such as hashes and table names. This feature is disabled by default in all installations and never available in Sage DPW Cloud. It was forcibly disabled again in version 2025_06_003.