CVE Feed

Pegatron `Tdelo64.sys` improperly exposes privileged hardware access functionality through the `\\.\TdeIo` device interface. IOCTL handlers including `TDE_IOCTL_INDEXIO_READ` and `TDE_IOCTL_INDEXIO_WRITE` permit unprivileged user-mode callers to perform arbitrary hardware I/O port reads and writes without authorization checks. A local attacker can abuse this functionality to manipulate hardware registers, tamper with firmware-related interfaces, cause system instability, or establish persistent low-level compromise.

A flaw was found in the AAP Gateway Envoy proxy configuration. The non-mTLS route to EDA event streams does not remove the Subject HTTP header from client requests, despite the source code defining requestHeadersToRemove for this header. An unauthenticated remote attacker can inject a spoofed Subject header matching a legitimate client certificate DN to bypass mTLS authentication and inject arbitrary events into protected EDA event streams.

The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx->buf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy'd into ctx->buf[ctx->scur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver's RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy.

RustFS Console is a web management console for the RustFS distributed file system. From 0.1.7 until 0.1.10, the RustFS Console components/object/preview-modal.tsx and components/object/pdf-viewer.tsx extension-based PDF preview path can render HTML content uploaded as .pdf, allowing stored cross-site scripting in the management console and exposure of administrator AccessKeyId, SecretAccessKey, and SessionToken values. This is caused by a regression of CVE-2026-27822. This vulnerability is fixed in 0.1.10.

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-61438. Reason: This candidate is a duplicate of CVE-2026-61438. Notes: All CVE users should reference CVE-2026-61438 instead of this candidate.

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-61440. Reason: This candidate is a duplicate of CVE-2026-61440. Notes: All CVE users should reference CVE-2026-61440 instead of this candidate.

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-61427. Reason: This candidate is a duplicate of CVE-2026-61427. Notes: All CVE users should reference CVE-2026-61427 instead of this candidate.

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-60085. Reason: This candidate is a duplicate of CVE-2026-60085. Notes: All CVE users should reference CVE-2026-60085 instead of this candidate.

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-61435. Reason: This candidate is a duplicate of CVE-2026-61435. Notes: All CVE users should reference CVE-2026-61435 instead of this candidate.

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-61433. Reason: This candidate is a duplicate of CVE-2026-61433. Notes: All CVE users should reference CVE-2026-61433 instead of this candidate.

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-61436. Reason: This candidate is a duplicate of CVE-2026-61436. Notes: All CVE users should reference CVE-2026-61436 instead of this candidate.

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-61430. Reason: This candidate is a duplicate of CVE-2026-61430. Notes: All CVE users should reference CVE-2026-61430 instead of this candidate.

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-61443. Reason: This candidate is a duplicate of CVE-2026-61443. Notes: All CVE users should reference CVE-2026-61443 instead of this candidate.

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-61446. Reason: This candidate is a duplicate of CVE-2026-61446. Notes: All CVE users should reference CVE-2026-61446 instead of this candidate.

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-60087. Reason: This candidate is a duplicate of CVE-2026-60087. Notes: All CVE users should reference CVE-2026-60087 instead of this candidate.

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-61449. Reason: This candidate is a duplicate of CVE-2026-61449. Notes: All CVE users should reference CVE-2026-61449 instead of this candidate.

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-61451. Reason: This candidate is a duplicate of CVE-2026-61451. Notes: All CVE users should reference CVE-2026-61451 instead of this candidate.

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-61452. Reason: This candidate is a duplicate of CVE-2026-61452. Notes: All CVE users should reference CVE-2026-61452 instead of this candidate.

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-61453. Reason: This candidate is a duplicate of CVE-2026-61453. Notes: All CVE users should reference CVE-2026-61453 instead of this candidate.

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-61457. Reason: This candidate is a duplicate of CVE-2026-61457. Notes: All CVE users should reference CVE-2026-61457 instead of this candidate.

Apollo is a reliable configuration management system suitable for microservice configuration management scenarios. Prior to 2.5.2, Apollo ConfigService may allow unauthorized access to raw configuration data when AccessKey or management key authentication is enabled because requests under /configfiles/raw/{appId}/{clusterName}/{namespace} are parsed for authentication as appId raw instead of the actual path appId, causing ConfigService to look up AccessKey secrets for raw before verifying the request signature and potentially continue without signature verification for the target appId. This issue is fixed in version 2.5.2.

Apollo is a reliable configuration management system suitable for microservice configuration management scenarios. Prior to 2.5.2, Apollo ConfigService may allow unauthorized access to configuration data when AccessKey or management key authentication is enabled because ConfigService can accept a non-canonical appId variant during authentication while downstream request handling resolves it to the protected app, including accent variants under accent-insensitive collations or trailing-space variants under PAD SPACE collations on /configs and /configfiles endpoints. This issue is fixed in version 2.5.2.

Lightpanda is a headless browser designed for AI and automation. Prior to 0.2.9, Lightpanda fetch() and XMLHttpRequest unconditionally attached session cookies to every HTTP request, ignoring credentials: omit, credentials: same-origin, credentials: include, and XMLHttpRequest.withCredentials, allowing an attacker-controlled origin in a Lightpanda session to issue authenticated cross-origin requests against a victim origin. This issue is fixed in version 0.2.9.

Lightpanda is a headless browser designed for AI and automation. Prior to 0.3.1, Lightpanda searched for @ across the entire URL string instead of only the authority component when computing a page origin, so a URL such as `http://attacker.com/@victim.com/` was fetched from attacker.com but treated as `http://victim.com`, allowing a complete Same-Origin Policy bypass. This issue is fixed in version 0.3.1.

SurrealDB is a scalable, distributed, collaborative, document-graph database for the realtime web. Prior to 3.1.0, Document::purge_edges in surrealdb/core/src/doc/delete.rs automatically removed graph edge records with permissions disabled through opt.clone().with_perms(false) when a connected node was deleted, bypassing the edge table's PERMISSIONS FOR delete and PERMISSIONS FOR select clauses. This issue is fixed in version 3.1.0.

Postiz is an AI social media scheduling tool. Prior to 2.21.8, Postiz fails to verify Nowpayments IPN callback authenticity against the payment provider shared secret and reads the target subscription identifier from the untrusted request body, allowing a low-privileged account to grant arbitrary organizations lifetime PRO subscriptions without payment. This issue is fixed in version 2.21.8.

AdGuard Home is a network-wide software for blocking ads and tracking. Prior to 0.107.75, AdGuard Home's client-triggered DoQ forwarding path to a udp:// upstream reduced backend UDP DNS state by producing dns_id=0 or txid=0 and exposed a quoted-port ICMP source-port oracle, weakening DNS response matching for forwarded queries. This issue is fixed in version 0.107.75.

Diffusers is the a library for pretrained diffusion models. Prior to 0.38.0, Diffusers' DiffusionPipeline.from_pretrained flow can bypass the trust_remote_code guard because download() validates model_index.json and custom pipeline code before later loading from a cached folder that can change, allowing a Hub repository with custom .py pipeline code to execute through the custom pipeline flow without passing custom_pipeline or trust_remote_code=True. This issue is fixed in version 0.38.0.

Composer is a dependency Manager for the PHP language. Prior to 1.10.28, 2.2.28, and 2.9.8, Composer\IO\BaseIO::loadConfiguration() validates GitHub OAuth tokens with the regex ^[.A-Za-z0-9_]+$ and interpolates rejected tokens into an UnexpectedValueException; GitHub Actions GITHUB_TOKEN values using the ghs_<id>_<base64url-JWT> format can contain -, fail validation, and be disclosed to stderr or CI logs. This issue is fixed in versions 1.10.28, 2.2.28, and 2.9.8.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco RoomOS engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20187 are related to improper handling of exceptional conditions that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-703.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco RoomOS engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20158 are related to improper control of a resource through its lifetime that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-664.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco RoomOS engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20157 are related to missing encryption that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-311.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco RoomOS engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20156 are related to improper restriction of operations within the bounds of a memory buffer that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-119.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco RoomOS engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20153 are related to improper input validation that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-20.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco RoomOS engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20150 are related to improper access control&nbsp;that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-284.

A vulnerability in Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker to perform path traversal attacks on the underlying operating system to either read or delete arbitrary files. To exploit this vulnerability, the attacker must have valid administrative credentials.&nbsp; This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to access sensitive files or delete arbitrary files on the affected system.

Pega Platform versions 8.1.0 through 25.1.2 are affected by an Reflected Cross-site scripting (XSS) vulnerability in a user interface component. Requires a high privileged user with a developer role.

Pega Platform versions 8.1.0 through 25.1.2 are affected by an Stored Cross-site scripting (XSS) vulnerability in a user interface component. Requires a high privileged user with a developer role.

Apollo is a reliable configuration management system suitable for microservice configuration management scenarios. Prior to 2.5.0, Apollo Portal does not verify application and namespace permissions when an authenticated user requests a release by ID through GET /envs/{env}/releases/{releaseId} while configView.memberOnly.envs is enabled, allowing a low-privileged Portal user who obtains or guesses a valid releaseId to read configuration data from other applications and namespaces without calling UserPermissionValidator.shouldHideConfigToCurrentUser(...). This issue is fixed in version 2.5.0.