CVE Feed

In the Linux kernel, the following vulnerability has been resolved: qede: fix out-of-bounds check for cqe->len_list[] Move index check before element access.

In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg Sashiko found that user can cause this WARN_ON_ONCE() easily with adding a kprobe event based on a raw address with BTF parameter. Since this is not an unexpected condition, remove the WARN_ON_ONCE().

In the Linux kernel, the following vulnerability has been resolved: drm/xe/userptr: Hold notifier_lock for write on inject test path When CONFIG_DRM_XE_USERPTR_INVAL_INJECT=y, xe_pt_svm_userptr_pre_commit() runs vma_check_userptr() with the svm notifier_lock taken for read. The test injection causes vma_check_userptr() to call xe_vma_userptr_force_invalidate(), which feeds into xe_vma_userptr_do_inval() with drm_gpusvm_ctx.in_notifier=true. That flag tells drm_gpusvm_unmap_pages() the caller already holds notifier_lock for write and only asserts the mode. Because the caller actually holds it for read, the assertion fires: WARNING: drivers/gpu/drm/drm_gpusvm.c:1669 at \ drm_gpusvm_unmap_pages+0xd4/0x130 [drm_gpusvm_helper] Call Trace: xe_vma_userptr_do_inval+0x40d/0xfd0 [xe] xe_vma_userptr_invalidate_pass1+0x3e6/0x8d0 [xe] xe_vma_userptr_force_invalidate+0xde/0x290 [xe] vma_check_userptr.constprop.0+0x1c6/0x220 [xe] xe_pt_svm_userptr_pre_commit+0x6a3/0xc60 [xe] ... xe_vm_bind_ioctl+0x3a0a/0x4480 [xe] Acquire notifier_lock for write in pre-commit when the inject Kconfig is enabled, via new helpers xe_pt_svm_userptr_notifier_lock()/_unlock(). Rename xe_svm_assert_held_read() to xe_svm_assert_held_read_or_inject_write() so it asserts the correct mode under each build configuration. Production builds (CONFIG_DRM_XE_USERPTR_INVAL_INJECT=n) keep the existing read-mode behavior bit-for-bit. (cherry picked from commit 80ccbd97ffee8ad2e73167d826fe7be548364365)

In the Linux kernel, the following vulnerability has been resolved: HID: picolcd: prevent NULL pointer dereference in picolcd_send_and_wait() In picolcd_send_and_wait(), an integer overflow of the signed loop counter 'k' can theoretically lead to a NULL pointer dereference of 'raw_data'. If the loop executes more than INT_MAX times, 'k' becomes negative, making the condition 'k < size' true even when 'size' is 0. Change the type of 'k' to 'unsigned int' to prevent the overflow and eliminate the out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. [jkosina@suse.com: extended hash length]

In the Linux kernel, the following vulnerability has been resolved: HID: core: Fix OOB read in hid_get_report for numbered reports When a caller passes a size of 0 to hid_report_raw_event() for a numbered report, the function originally called hid_get_report() before performing any size validation. Inside hid_get_report(), if the report is numbered (report_enum->numbered is true), it unconditionally dereferences data[0] to extract the report ID. With a size of 0, this results in an out-of-bounds read or kernel panic. Fix this by moving the numbered report size validation check before the call to hid_get_report(), ensuring that size is at least 1 before dereferencing the data pointer.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_irc: fix parse_dcc() off-by-one OOB read parse_dcc() treats data_end as an inclusive end pointer, but its only caller passes data_limit = ib_ptr + datalen, which points one past the last valid byte. The newline search loop iterates while tmp <= data_end, so when no newline is present, *tmp is read at tmp == data_end, one byte beyond the region filled by skb_header_pointer(). irc_buffer is kmalloc'd as MAX_SEARCH_SIZE + 1 bytes and datalen is capped at MAX_SEARCH_SIZE, so the stray read does not fault. The byte is uninitialized or stale; if it contains an ASCII digit, simple_strtoul will consume it and produce a wrong DCC IP or port in the conntrack expectation. The extra allocation byte is also a fragile guard: if the cap or allocation size changes, this becomes a real out-of-bounds read. Change the loop and its post-loop check to use strict less-than, consistent with the caller's exclusive-end convention. Update the function comment accordingly.

In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/lbr: Fix kernel address leakage A user-only branch stack can contain branches that originate from the kernel. As a result, kernel addresses are exposed to user space even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors supporting X86_FEATURE_AMD_LBR_V2, perf can still report SYSRET/ERET entries for which the branch-from addresses are in the kernel. E.g. $ perf record -e cycles -o - -j any,save_type,u -- \ perf bench syscall basic --loop 1000 | \ perf script -i - -F brstack|tr ' ' '\n'| \ grep -E '0x[89a-f][0-9a-f]{15}' ... 0xffffffff81001268/0x717a90a38f1a/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a39157/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a2c628/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a41b60/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a260db/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a260db/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a8bef1c30/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a8e4d3c90/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH ... The reason is that the hardware filter only considers the privilege level applicable to the branch target. Extend software filtering to also validate the branch-from addresses against br_sel, so that any branch record whose branch-from address is in the kernel is dropped when PERF_SAMPLE_BRANCH_USER is requested.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: gw: acquire ethernet header only after skb realloc The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: acquire ARP hw source only after skb realloc The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: ensure accessible eth_hdr proto field When batadv_get_vid() accesses the proto field of the ethernet header, it is not checking if the data itself is accessible. The caller is responsible for it. But in contrast to other call sites, batadv_dat_get_vid() and its caller didn't make sure this is true. This could have caused an out-of-bounds access.

In the Linux kernel, the following vulnerability has been resolved: ntfs3: fix out-of-bounds read in decompress_lznt decompress_lznt() does not validate array index bounds before accessing the decompression table. A corrupted NTFS3 image with invalid compressed data can trigger an out-of-bounds read. Add index bounds checking to prevent the OOB access.

In the Linux kernel, the following vulnerability has been resolved: mtd: maps: vmu-flash: fix NULL pointer dereference in initialization The mtd_info contains a struct device, which must be linked to its parent. Without this, the initialization of the MTD fails with a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - only expose sysfs attributes on control interface When the driver was converted to use the driver core to instantiate device attributes (via .dev_groups in the usb_driver structure), the attributes started appearing on all interfaces bound to the driver. Since the ims-pcu driver manually claims the secondary data interface during probe, the driver core automatically creates the sysfs attributes for that interface as well. However, the driver only supports these attributes on the primary control interface. Data interfaces lack the necessary descriptors and internal state to handle these requests, and accessing them can lead to unexpected behavior or crashes. Fix this by updating the is_visible() callbacks for both the main and OFN attribute groups to verify that the interface being accessed is indeed the control interface.

In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - add response length checks The driver processes response data from device buffers without verifying that the device actually sent enough data. This can lead to out-of-bounds reads or processing stale data. Add checks for the expected response length before accessing the buffers.

In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix potential infinite loop in CDC union descriptor parsing The driver parses CDC union descriptors in ims_pcu_get_cdc_union_desc() by iterating through the extra descriptor data. However, it does not verify that the bLength of each descriptor is at least 2. A malicious device could provide a descriptor with bLength = 0, leading to an infinite loop in the driver. Add a check to ensure bLength is at least 2 before proceeding with parsing.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus_atk0110) Check package count before accessing element atk_ec_present() walks the management group package returned by the GGRP ACPI method and, for each sub-package, reads its first element: id = &obj->package.elements[0]; if (id->type != ACPI_TYPE_INTEGER) without checking that the sub-package is non-empty. ACPICA allocates the element array with exactly package.count entries, so for a sub-package with a zero count this reads past the allocation. The sibling function atk_debugfs_ggrp_open() performs the same access but skips empty packages with a package.count check first. Add the same check to atk_ec_present() so a malformed firmware package cannot trigger an out-of-bounds read.

In the Linux kernel, the following vulnerability has been resolved: samples/damon/mtier: fail early if address range parameters are invalid The comment on top of `struct damon_region` clearly says that For any use case, @ar should be non-zero positive size. which is now verified in damon_verify_new_region() if the kernel is built with DAMON_DEBUG_SANITY. The WARN_ONCE() can be triggered if the mtier sample module is enabled before node{0,1}_{start,end}_addr have been properly initialized, which is obviously not good. ------------[ cut here ]------------ start 0 >= end 0 WARNING: mm/damon/core.c:217 at damon_new_region+0xf4/0x118, CPU#59: bash/341468 Call trace: damon_new_region+0xf4/0x118 (P) damon_set_regions+0xfc/0x3c0 damon_sample_mtier_build_ctx+0xe8/0x3a8 damon_sample_mtier_start+0x1c/0x90 damon_sample_mtier_enable_store+0x98/0xb0 param_attr_store+0xb4/0x128 module_attr_store+0x2c/0x50 sysfs_kf_write+0x58/0x90 kernfs_fop_write_iter+0x16c/0x238 vfs_write+0x2c0/0x370 ksys_write+0x74/0x118 __arm64_sys_write+0x24/0x38 invoke_syscall+0xa8/0x118 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x54/0x370 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1ac/0x1b0 ---[ end trace 0000000000000000 ]--- Note that the same issue can happen if detect_node_addresses is true, and node 0 or 1 is memoryless. Fix it together by checking the validity of parameters right before damon_new_region() and fail early if they're invalid.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix listxattr handling of corrupted xattr entries Validate the xattr entry before reading its fields in f2fs_listxattr(). Return -EFSCORRUPTED when the entry is outside the valid xattr storage area instead of returning a successful partial result.

In the Linux kernel, the following vulnerability has been resolved: inet: frags: strip GSO state from fragments before reassembly A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off. inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first fragment's skb as the head of the reassembled datagram, including its shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments on frag_list with whatever linear/paged layout they arrived with. After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the reassembled skb therefore still claims to be GSO (SKB_GSO_DODGY), and the next software segmentation point - udp_rcv_segment() on local delivery, validate_xmit_skb(), or the ip_finish_output_gso() slow path - hands it to skb_segment(). skb_segment()'s frag_list walk assumes GRO-shaped input and hits one of its BUG_ON()s. Two writes to a tap by an unprivileged user in its own userns are enough: kernel BUG at net/core/skbuff.c:4899! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 1000 PID: 82 Comm: poc Not tainted 7.2.0-pentest+ #2 RIP: 0010:skb_segment+0x20ca/0x48b0 Call Trace: <TASK> __udp_gso_segment+0x29a/0x27d0 udp4_ufo_fragment+0x458/0x6c0 inet_gso_segment+0x429/0x1340 skb_mac_gso_segment+0x233/0x4f0 __skb_gso_segment+0x308/0x660 udp_queue_rcv_skb+0x440/0xad0 udp_unicast_rcv_skb+0xc7/0x2c0 udp_rcv+0x16ce/0x2260 ip_protocol_deliver_rcu+0x197/0x2d0 ip_local_deliver+0x430/0x690 ip_rcv+0x16f/0x1f0 __netif_receive_skb_one_core+0x15e/0x1c0 __netif_receive_skb+0x1e/0x110 netif_receive_skb+0xf6/0x5c0 tun_rx_batched.isra.0+0x3ab/0x790 tun_get_user+0x17c3/0x3550 tun_chr_write_iter+0xba/0x1b0 vfs_write+0x646/0x1130 </TASK> Kernel panic - not syncing: Fatal exception in interrupt This runs with BH disabled, so it is a panic rather than an oops. The same is reachable with CAP_NET_RAW in a netns where a defrag point precedes a GSO point, and from a guest whose VMM forwards virtio_net_hdr to a tap. The SKB_GSO_DODGY frag_list checks added by commit 3dcbdb134f32 ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list") and by commit 9e4b7a99a03a ("net: gso: fix panic on frag_list with mixed head alloc types") do not cover it: page-backed heads skip them, and kmalloc heads skip them when gso_size == skb_headlen(head), which the sender controls. An skb entering a frag queue is an IP fragment by definition and cannot legitimately carry GSO state: GRO does not merge fragments and the stack segments before it fragments, so only untrusted sources are affected. This has been reachable since commit f43798c27684 ("tun: Allow GSO using virtio_net_hdr"), the first path that let userspace attach GSO metadata to an IP fragment. Reset the GSO fields of every fragment as it is queued, in inet_frag_queue_insert(), which IPv4, IPv6, nf_conntrack_reasm and 6lowpan reassembly share; then neither the head nor the frag_list members of the reassembled skb carry them (the members matter too: the ip_do_fragment()/ip6_fragment() fast paths send them out as they are). The head may remain CHECKSUM_PARTIAL; that is already accepted on receive and resolved by skb_checksum_help() in ip_do_fragment()/ip6_fragment() on forward. Tested on top of net.git (dc4b95b8fee9), x86_64: the tap reproducer above, two further IPv4 frag_list geometries that reach BUG_ON(i >= nfrags) and BUG_ON(!list_skb->head_frag), and an IPv6 fragment-header variant (udp6_ufo_fragment()) each panic the unpatched kernel; with this patch all four datagrams are delivered intact and nothing is logged.

The User Registration & Membership WordPress plugin before 5.2.6 does not perform a capability check when saving its login settings, allowing authenticated users who have been granted a User Registration & Membership WordPress plugin before 5.2.6 management capability but not full administrator access to change arbitrary site options and escalate their privileges to administrator.

The User Registration & Membership WordPress plugin before 5.2.5 does not verify that the account whose pending email change is being cancelled belongs to the user making the request, allowing authenticated users with Subscriber-level access and above to cancel any other user's in-progress email change, including an administrator's.

The Breeze Cache WordPress plugin before 2.5.13 does not sanitise a value taken from the request before using it to build the paths of the files it caches, allowing unauthenticated attackers to create files at arbitrary locations on the server, outside the intended cache directory.

The Quiz and Survey Master (QSM) WordPress plugin before 11.2.4 does not check authorisation when returning question bank entries through one of its REST API routes, allowing users with a role as low as Contributor to read the questions, hints and correct answer keys of quizzes belonging to other users.

SOY Gallery contains a cross-site scripting vulnerability. An arbitrary script may be executed on the web browser of the user who is logging in to the product.

SOY CMS contains an issue with deserialization of untrusted data. An arbitrary code may be executed by an attacker with the web server privilege.

SOY Calendar contains a cross-site scripting vulnerability. An arbitrary script may be executed on the web browser of the user who is logging in to the product.

The WCFM Marketplace WordPress plugin before 3.8.2 does not correctly verify that the person requesting a refund owns the order, allowing unauthenticated users to create refund requests against any guest checkout order on the site.

The WPMU DEV Dashboard plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 5.0.1. This is due to inconsistent and ambiguous HMAC message construction between the unauthenticated `wdpsso_step1` and `wdpsso_step2` AJAX actions, where step 1 signs and discloses an unseparated concatenation of the token, state, redirect, and domain values, while step 2 verifies an unseparated concatenation that omits the domain field. This makes it possible for unauthenticated attackers, on sites connected to WPMU DEV with Hub SSO enabled and mapped to an administrator, to obtain a valid HMAC from step 1 and replay it to step 2 by moving the domain value into the redirect field, resulting in an authenticated administrator session.

SOY Calendar contains a cross-site scripting vulnerability. An arbitrary script may be executed on the web browser of the user who is logging in to the product.

The Booking for Appointments and Events Calendar – Amelia plugin for WordPress is vulnerable to Stored Cross-Site Scripting via customer name fields in versions up to and including 2.2. This is due to an authentication bypass where the AddBookingCommand explicitly skips nonce verification (Command.php line 186), allowing unauthenticated users to submit booking data. While the plugin applies sanitize_text_field() to customer firstName and lastName fields (BookingApplicationService.php lines 302-308), this function only removes HTML tags and preserves special characters including double quotes. The vulnerability manifests in the administrative Calendar view where a FullCalendar eventContent callback interpolates customer names directly into JavaScript template literals (redesign/dist/index.js line 199) and renders them via innerHTML without proper HTML entity encoding. Because double quotes are preserved, an attacker can inject payloads like '" onmouseover="alert(document.cookie)"' to break out of the title attribute and inject malicious event handlers. This makes it possible for unauthenticated attackers to inject arbitrary web scripts that will execute when an administrator accesses the Calendar page and hovers over the malicious appointment.

The wpForo Forum plugin for WordPress is vulnerable to SQL Injection via the 'referer' parameter in all versions up to, and including, 2.4.17. This is due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

The ElementsKit Pro plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 's' parameter of the Advanced Search REST endpoint in all versions up to, and including, 4.10.1 due to insufficient input sanitization and output escaping. The REST endpoint at /wp-json/elementskit/v1/advanced-search uses permission_callback set to __return_true, allowing unauthenticated access. Search terms are stored in the ekit_advanced_search_popular_keyword WordPress option via update_option(). While sanitize_text_field() is applied, it does not encode double quotes, and the stored keywords are rendered in HTML attributes via sprintf without esc_attr(), allowing attribute injection. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user triggers the "no results" popular keywords view on pages using the Advanced Search widget.

An improper neutralization of input during web page generation ('Cross-site Scripting') vulnerability in extract domain in Synology Chat Server before 2.4.5-22148 allows remote authenticated users, via a UI interaction, to read or write arbitrary files and conduct denial-of-service attacks in DSM.

The Ultimate Member WordPress plugin before 2.13.0 does not validate a submitted role selection when it cannot resolve the set of roles a profile form permits, and screens the value against the site's registered role names rather than against the form's own allow-list, allowing unauthenticated users who register through the Ultimate Member WordPress plugin before 2.13.0's own form to grant themselves arbitrary capabilities and reach administrator-equivalent access.

The shared-files-pro WordPress plugin before 1.7.70 does not validate the file path supplied when creating a featured image, allowing unauthenticated attackers to read arbitrary files from the server and republish their contents at a public URL.

The User Frontend WordPress plugin before 4.3.10 does not restrict access to its user directory search endpoint, allowing unauthenticated attackers to retrieve the email address and phone number of every registered user, including administrators.

The User Frontend WordPress plugin before 4.3.10 does not properly validate field type definitions and deserialises user-controlled post metadata when rendering submitted posts, allowing users with Editor-level access and above to inject arbitrary PHP objects, which can lead to remote code execution when a suitable POP chain is present on the site.

The Shared Files WordPress plugin before 1.7.67, shared-files-pro WordPress plugin before 1.7.70 do not perform a capability check in their file-upload handler, which is registered for unauthenticated users and protected only by a nonce that is output on public pages, so an unauthenticated visitor can upload files to a publicly accessible directory and read the server's absolute path from the response. Uploads are limited to WordPress's allowed MIME types, so executable PHP cannot be uploaded.

The Shared Files WordPress plugin before 1.7.67, shared-files-pro WordPress plugin before 1.7.68 do not properly sanitize a file path taken from a frontend file submission and their single-pass traversal filter is bypassable, allowing unauthenticated users to store a path that points outside the uploads directory. When the corresponding file entry is later permanently deleted, an arbitrary file on the server (such as wp-config.php) is deleted, leading to denial of service and potential site takeover.